Battery Cells Heat And Cold Press

 Products Description  The XW-THPM hot shaping machine is specifically designed for the thermal press forming of soft-pack lithium-ion battery cells. It utilizes a temperature control system, incorporating a temperature controller and thermocouple, to precisely regulate the heating tube’s temperature settings.  Technical Parameters  Model XW-THPM Source voltage AC110V/220V  50/60HZ Power 3KW Warranty One year limited warranty with lifetime support Table size (L*W) 300*350mm Customized Capacity  According to the setting time Max press pressure […]

 Products Description  The machine features a straightforward design and user-friendly operation. To operate, first power on the equipment. After setting the desired temperature, the machine will automatically begin heating. Once the target temperature is reached, manually place the cell or other materials onto the lower plate. Set the desired press time and pressure, then double-press

 Products Description  1.Equipment descriptionThe machine has simple structure and easy operation.During operation, first turn on the power of the equipment and let the equipment heat up by itself. After reaching the required temperature, place the material to be pressed flat on the lower pressing plate, set the required pressing time and required cylinder pressure, and

 Products Description 

 Products Description  overview  Technical Parameters  Technical parameters The template area 370 * 270mm Configure Power 220V / 50HZ, 6.5KW Pressurized cylinder 3t Dimensions (L * W * H) 670 * 650 * 1200mm Weight 300kg

 Products Description  XW-RY200 Hot press machine is mainly used for battery cells hot press shaping after winding process, easy for battery core into the pouch or shell. Using the hot press shaping machine after battery winding on the template by pressure and heat to reduce batteries thickness with finalize design, reducing the battery core short

 Products Description  The XW-D-RY400 heat press machine is primarily designed for hot pressing battery cells after the winding process, facilitating their insertion into pouches or shells. This hot press shaping machine applies pressure and heat to battery cells on a template post-winding, effectively reducing their thickness and finalizing their design. This process not only minimizes

 Products Description  This device is primarily designed for the manual hot side setting process in flexible packaging of lithium batteries. It features an intelligent temperature-controlled heating platform, ensuring stable performance, safe and reliable operation, and user-friendly controls.  Technical Parameters  Technical parameters Platform specifications (L * W) 350x 250mm Operating modes manual control Configure Power 220V / 50HZ, power: 2KW Weight About 30kg

 Products Description  The XW-JEQY is a specialized system designed for the precise cutting and shaping of stacked cells following the tab welding process. Once the tab-welded cell is positioned, activating the foot switch initiates the cylinder, which propels the upper pressure block and cutting blade downward to trim excess stacking material and tabs. Subsequently, the