Pouch Cell Edge Trimming Machine

 Products Description  This machine is an automatic three-in-one system designed for polymer battery processing, specifically for edge cutting, folding (trimming), and heat shaping (perming). It is primarily utilized for the exterior molding of lithium pouch cells. 1.1 Capable of automatically trimming, folding edges, and heat shaping for soft-packed lithium batteries. 1.2 The trimming mechanism’s space […]

 Products Description  This edge heating machine is specifically designed for edge shaping of lithium pouch cells and lithium polymer cells following the edge folding process. Main features:  1 Imported temperature controller can control the temperature of heating plate accurately, temperature can be arbitrarily adjusted from room temperature to 250 degrees. 2 Unique safety protection, prevent

 Products Description  Battery edge Press machine is mainly used for lithium polymer battery pouch edge hot press after folding  Technical Parameters  Model  Battery Press Machine XW-P-YB30  Source voltage AC110V-240V, Customized Power 500W Warranty One Year limited warranty with lifetime support Max Press length 300mm Dimension 355*570*540mm Weight 73kg

 Products Description  This equipment is specifically designed for flexible packaging of lithium batteries, featuring a manual packaging process that accommodates unilateral sealing on both the top and side surfaces of the batteries. It incorporates independent temperature control systems for the upper and lower heating heads, ensuring precise thermal regulation during the packaging operation.  Technical Parameters 

 Products Description  It is utilized for folding the edges of lithium-ion pouch cell casings following the edge trimming procedure. Features:  Thewidth of foldingmold can be adjusted according to the needs of the battery. Air pressure and speed can be set and adjusted according to process requirements.Using foot switch, reliable, convenient and fast. The equipment is exquisite,

 Products Description  1 Battery edge cutting machine is mainly used for lithium polymer battery pouch edge trimming before edge folding. 2 It can also be used for aluminum laminated film pouch trimming after pouch forming process 3 XW-P-QB System manual cutting machine has a adjustable cutting width for 2-8mm, with cutting length 200mm, 300mm or

 Products Description  It is utilized for folding the edges of lithium-ion pouch cell casings following the edge trimming procedure. Main Features: 1.It uses the silver linear slide group for guidance, high precision to ensure that the upper and lower cutting between the zero gap and long service life.2.It uses plexiglass protective cover to prevent cut

 Products Description   Technical Parameters  Model XW-P-QB30 Voltage supply AC110V/220V, 50/60HZ Power 500w Warranty One year limited warranty with lifetime support Edge cutting length 300mm Margin width  2.5-8mm Air supply 0.6-0.8MPa Weight  40kg

 Products Description  The XW-PEC-400 battery pouch edge cutting machine is specifically designed for trimming the top and side edges of battery pouches after the forming process. Equipment characteristic Using cylinder punching method, the upper cutter is guided by the mold ball guide column, and the guiding precision is extremely high. Guarantee the zero gap between