Products Description
- Single motor and gear drive, electronic control part using PLC and touch screen tension, pressure, speed online adjustment; The hydraulic pressure is pressurized by electric booster pump, and the servo motor drives the intermediate inclined iron to automatically adjust the gap;
- two rollers up and down layout, “mouth” type cast steel arch overall strong, good stability.
Work process: Active servo unwinding → taping platform → unwinding tension detection → unwinding speed tracking swing roller → edge cutter → rolling (upper and lower rollers with scrapers) → Unwinding speed tracking swing roller → unwinding tension detection → unwinding platform → active servo unwinding
Technical Parameters
| Roller Press + Calendering Machine (Lab Version) Φ210 | |
| Roll specification | 210x300mm(roll diameter × roll width) |
| Machine speed | 2 ~ 8r min |
| Power requirements | 380V/50Hz power 7.5KW; |
| Material | 9cr3Mo series high alloy cold roll steel |
| Surface hardness | HRC66-68 |
| Depth of quenching layer | 12 ~ 15mm |
| Roll diameter jump | ≤ ± 0.02mm |
| Roller surface roughness | Ra≤0.4 |
| Maximum working pressure | 34T |
| The total size of the production line | about 3983mm long × 1570mm wide × 1255mm high |
