Products Description
- Double motor double reducer drive cardan shaft transmission, electronic control part using PLC and touch screen tension, pressure, speed online adjustment; The hydraulic pressure is pressurized by electric booster pump, and the servo motor drives the intermediate inclined iron to automatically adjust the gap;
- Two rolling up and down arrangement, “mouth” type cast steel arch overall strong, good stability, equipped with roll disassembly device.
400 Roller Press Work Process: Active servo unwinding → taping platform → unwinding tension detection → unwinding speed tracking swing roller → edge cutter → brush suction cartridge → magnetic iron removal → rolling (upper and lower rollers with scrapers) → unwinding speed tracking swing roller → unwinding tension detection → unwinding tape platform → active servo unwinding → ultrasonic coil diameter detection
Technical Parameters
| Φ400 Roller Press/Calendering Machine | |
| Roll size | Φ400mm ×450mm Φ400mm ×500mm（Can be customized according to customer needs） |
| Roll speed | 2 ~ 12r min variable speed adjustable; |
| Rolling line speed | 2 ~ 14m/min |
| Maximum working pressure | 500KN-4000KN; |
| Roll diameter skip | ≤± 0.01mm |
| Roll hardness | HRC66-68 |
| Power requirements | 380V/50Hz power 10KW; |
| Compressed air | pressure 0.5Mpa ~ 0.7Mpa, flow rate |
| Total weight of the equipment | about 4.5 t |
| Load bearing requirements for the floor | > 2.5 T/m2 Place a supporting plate at the bottom of the device. |
| Equipment size | the roller part is about 2800mm long × 800mm wide × 1500mm high |
| The total size of the production line | about 5000mm long × 2800mm wide × 1500mm high. |
