Products Description
- Double motor double reducer drive cardan shaft transmission, electronic control part using PLC and touch screen tension, pressure, speed online adjustment; The hydraulic pressure is pressurized by electric booster pump, and the servo motor drives the intermediate inclined iron to automatically adjust the gap.
- Two rolling up and down arrangement, “mouth” type cast steel arch overall strong, good stability, equipped with roll disassembly device.
Work process:
Active servo unwinding → belt connecting platform → unwinding tension detection → unwinding speed tracking roll → edge cutting knife → brush powder cartridge → magnetic iron removal → front flattening → rolling (upper and lower roll belt.
Scraper→ rear flattening → laser online thickness measurement → winding speed tracking swing roller → winding tension detection → winding belt platform → active servo winding and placing an ultrasonic winding diameter detection.
Technical Parameters
| Roller Press/Calendering Machine Dia Φ800 Roll To Roll | |
| Roller size | Φ800mm * 750mm：Can be customized according to customer needs |
| Roll speed | 2 ~ 20r min, stepless adjustable speed; |
| Rolling speed | 2 ~ 50m/min |
| Maximum working pressure | 500KN-6900KN; |
| Power requirements | 380V/50Hz, power 40KW; |
| Roll diameter skip | ≤ ± 0.001mm roll hardness: HRC66-68 |
| Compressed air | pressure 0.5Mpa ~ 0.7Mpa flow rate: 0.4m3 /min; |
| Total weight of equipment | about 32 T |
| Equipment installation ground bearing requirements | > 6T/m2 and placed at the bottom of the equipment pad. |
| Equipment size | the roller part is about 4000mm long x 1600mm wide x 3200mm high, |
| The total size of the production line is about | 7000mm long x 4000mm wide x 2500mm high. |
