Products Description
Diameter:8mm Lenght: 25m Mode:T-08400 Packing: 50pcs/bag
Technical Parameters
| Pouch Cell Case Dimensions | 8mm x 25 Length (mm) |
| Net Weight | 30 (50 pcs) |
| Layers from outside to inside (material in bracket) | Polyamid (JIS Z1714): 0.025mm(+-0.0025mm) |
| Adhesive (Polyester-polyurethane): 0.040mm(+-0.004mm) | |
| Adhesive (Urethane-free Adhesive): 2-3g/m2 | |
| Polypropylene: 0.040mm(+-0.004mm) | |
| Thickness: | 113μm |
| Surface Quality | Matte finish |
| Pinholes | Subject to the applicable aluminum foil standard |
| Impurity | 1mm or less in diameter |
| Fish Eye | 2mm or less in diameter (clear), 1mm or less in diameter(colored) |
| Moisture Vapor / O2 Transmission Rate | 200ppm / 5 years |
| Laminate Strength | Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
| Heat Seal Strength | More than 29.4N/15mm wide at 200℃ x 0.2Mpa x 2 sec by XW heat sealing |
| equipment | |
| Solvent Retention | Less than 5mg/m2 |
| Appearance | Within the sample of the limit |
| Slip Factor | CPP/CPP less than 1.0 |
