Products Description
1100 High Temperature chamber furnaces
Technical Parameters
| Model | XW-DSP-KF1100-I | XW-DSP-KF1100-II | XW-DSP-KF1100-III | XW-DSP-KF1100-IV | XW-DSP-KF1100-V | XW-DSP-KF1100-VI |
| Power | 2.5KW | 4KW | 5KW | 9KW | 16KW | 18KW |
| Furnace tube size(mm) | 300X200X120 | 300X200X200 | 300X250X250 | 400X300X300 | 500X400X400 | 500X500X500 |
| Dimension | 460X670X612 | 460X670X672 | 530X670X752 | 600X770X832 | 740X860X110 | 840X860X1200 |
| Power supply voltage | 220V | 380V | ||||
| Phase number | Single-phase | Three Phase | ||||
| Heating element | Using imported resistance wire (Sweden Kanthal A1) | |||||
| Temperature control mode | 一.Yudian temperature control | |||||
| 30 sections can only use PID temperature regulation. | ||||||
| 二.FP93 temperature control (from Japan) | ||||||
| (Replace imported instruments, for an additional fee) | ||||||
| 1,40 section program temperature control can be divided into 4,2,1 group program, | ||||||
| if the program is divided into four groups, each program segment 10, | ||||||
| 2,6 group PID control, low, medium and high temperature can each with a set of PID, | ||||||
| such that each segment is capable of controlling the temperature is very accurate. | ||||||
| Control accuracy | +/- 1 ℃ | |||||
| Max temperature | 1100 ℃ | |||||
| Rated temperature | 1000 ℃ | |||||
| Thermocouple Type | Type K | |||||
| Trigger | Phase-shift trigger | |||||
| Heating rate | ≤30 ℃/ Min | |||||
| Recommended heating rate | 15℃/ Min | |||||
| SCR | 106 / 16E Germany Semikron | |||||
| Surrounding surface temperature | ≤35℃ | |||||
