Products Description
The XW-MF1200 Muffle Furnace is a high-temperature laboratory furnace capable of reaching up to 1200°C. It is specifically designed for sintering research on battery materials, various powder materials, and ceramics.
Technical Parameters
| Model | Muffle Furnace XW-MF1200 |
| Structure | 1 Thermal efficient ceramic (high purity alumina fiber) insulation surroundingthe chamber provides maximum energy efficiency.2 Heating elements on all four sides of interior chamber for fast heating andenhanced temperature uniformity.3 Heavy duty double layer structure with cooling fan to keep furnace exteriors safe to touch.4 Built-in vent port removes undesirable contaminants and moisture;extends the life span of the heating elements and furnace. |
| Chamber Dimensions | Size: 12″ x 12″ x 12″, 300*300*300mmCapacity: 27 liters |
| Power | 7 KW Max. at 10oC/min to 1200oC40 A fuse (installed) |
| Voltage | 110~240V AC, Single phase, 50/60Hz |
| Operating Temperature | 1100°C (Continuous)1200°C Max (< 3 hour) |
| Temperature Stability | ±1°C at 1000°C |
| Temperature Uniformity | ±3.45°C at 1000°C |
| Max. Heating Rate | 10°C/min |
| Temperature Controller | 1 PID automatic control with 30 programmable segments for precise control.2 Built-in over temperature alarm and protection3 +/- 1 ºC temperature accuracy.4 K type thermocouple installed for immediate use. |
| Gas Fitting & Exhaust | One 1/4″ barbed Gas Inlet installed on back panel of furnaceOne gas exhaust port is built on the top of the furnace casing. |
| Product Dimensions | 24″ x 26″ x 22″ (D x H x W) 60*66*55cm |
| Shipping Dimensions | 48″ x 40″ x 49″ (D x W x H) 122*100*125cm |
| Shipping Weight | 350 lb, 160kg |
| Warranty | One year limited warranty with life time support. |
| Application Notes | 1 For preserving the longevity of the furnace components,we recommend the heating rate not to exceed 10 °C /min.Cooling rate shall also not exceed 10 °C /min.2 This furnace lacks vacuum sealing ,toxic or explosive gases are not recommended for use withthis furnace without necessary safety controls and supervision.3 Small cracks may appear on surface of refractory ceramics over extended use.This is a normal occurrence and the cracks may be repaired with alumina coating |
