Products Description
High-Pressure Furnace with Dual Temperature Zones Capable of Operating at 1100°C
Technical Parameters
| Model | XW-DSP-1200℃-SRI | XW-DSP-1200℃-SRI |
| Power | 3.5 KW | 4 KW |
| Furnace tube size(mm) | Dia 60(OD) X1200 | Dia 120(OD) X1200 |
| Dimension | 580X370X1050 | 600X440X1100 |
| Power supply voltage | 220V | |
| Phase number | Single-phase | |
| Temperature control mode | 一.Yudian temperature control | |
| 30 sections can only use PID temperature regulation. | ||
| 二.FP93 temperature control (from Japan) | ||
| (Replace imported instruments, for an additional fee) | ||
| 1,40 section program temperature control can be divided into 4,2,1 group program, | ||
| if the program is divided into four groups, each program segment 10, | ||
| 2,6 group PID control, low, medium and high temperature can each with a set of PID, | ||
| such that each segment is capable of controlling the temperature is very accurate. | ||
| Control accuracy | +/- 1 ℃ | |
| Tube rotation speed | Stepless variable speed motor, speed can be adjustable between (1-25 turn / min) | |
| Motor rotation power | 40W | |
| Furnace tilt angle range | 0-30 degrees | |
| Electric lift support frame power | 40W | |
| Trigger | Phase-shift trigger | |
| SCR | 106 / 16E Germany Simon Kang | |
| Max temperature | 1200 ℃ | |
| Rated temperature | 1100 ℃ | |
| Heating rate | ≤30 ℃/ Min (Available upon request modification) | |
| Recommended heating rate | ≤20℃/ Min | |
| Heating length | 400mm | |
| Thermocouple Type | K type | |
| Surrounding surface temperature | ≤45℃ | |
| Security System | With the furnace air switch and fuse, when the current exceeds the rated current, | |
| it will automatically jump open, effective protection electric stove. | ||
| Switch protection system | The furnace trip switch is installed, when the lid open relay will automatically | |
| cut off the main power supply, effectively ensure the safety of users. | ||
