| Model | XW-DSP-KF1700-I | XW-DSP-KF1700-II | XW-DSP-KF1700-III | XW-DSP-KF1700-IV | XW-DSP-KF1700-V |
| Power | 3 KW | 5KW | 7KW | 9KW | 13KW |
| Furnace tube size(mm) | 160X150X150 | 200X200X200 | 300X200X200 | 300X250X250 | 400X300X300 |
| Dimension | 510X490X850 | 560X530X900 | 560X630X900 | 610X630X980 | 660X730X1340 |
| Power supply voltage | 220V | 380V |
| Phase number | Single-phase |
| Heating element | 1800 type silicon molybdenum rod |
| Temperature control mode | 一.Yudian temperature control |
| 30 sections can only use PID temperature regulation. |
| 二.FP93 temperature control (from Japan) |
| (Replace imported instruments, for an additional fee) |
| 1,40 section program temperature control can be divided into 4,2,1 group program, |
| if the program is divided into four groups, each program segment 10, |
| 2,6 group PID control, low, medium and high temperature can each with a set of PID, |
| such that each segment is capable of controlling the temperature is very accurate. |
| Heating rate | ≤30 ℃/ Min |
| Recommended heating rate | 15℃/ Min |
| Control accuracy | +/- 1 ℃ |
| Max temperature | 1700 ℃ |
| Rated temperature | 1650 ℃ |
| Thermocouple Type | Type B |
| Trigger | 1.Phase trigger (with soft start and current limiting function) |
| 2.Current limiting function: no matter how to adjust the heating time, |
| our furnace transformer secondary current through the post is limited to 160A, |
| limited protection of equipment, no matter how you operate, the device will not burn. |
| 3.Soft-start function: When the power current will slowly increase, |
| the impact on the heating element is small, help extend the life of the heating element |
| SCR | 106 / 16E Germany Semikron |
| Surrounding surface temperature | ≤45℃ |
| Certification | CE |
