Products Description
High Temperature chamber furnace
Technical Parameters
| Model | XW-DSP-KF1800-I |
| Power | 5.5KW |
| Furnace tube size(mm) | 180X150X150 |
| Power supply voltage | 220V |
| Phase number | Single-phase |
| Heating element | 1900 IKanthal silicon molybdenum rod |
| Control mode | 1.Yudian temperature control |
| 30 sections can only use PID temperature regulation. | |
| 2.FP93 temperature control (from Japan) | |
| (Replace imported instruments, for an additional fee) | |
| 1,40 section program temperature control can be divided into 4,2,1 group program, | |
| if the program is divided into four groups, each program segment 10, | |
| 2,6 group PID control, low, medium and high temperature can each with a set of PID, | |
| such that each segment is capable of controlling the temperature is very accurate. | |
| Heating rate | ≤30 ℃/ Min |
| Recommended heating rate | 15℃/ Min |
| Furnace material | Polycrystalline alumina fibers (imported from Japan) |
| Control accuracy | +/- 1 ℃ |
| Max temperature | 1800 ℃ |
| Rated temperature | 1750 ℃ |
| Thermocouple Type | Type K |
| SCR | A triac |
| Surrounding surface temperature | ≤45℃ |
