Products Description
Product pictures just as reference , please in kind prevail
1.Application
Various types of common battery powder and liquid mixing，eventually get a mixed uniform battery slurry. It is suitable for high viscosity process.
Suitable for operating viscosity range ≤ 1.2 million cP
Technical Parameters
1) Lower Barrel Parts
| Design total volume | 2.1L |
| Elective volume | 0.7-1L |
| Container inner diameter | 164mm |
| Container inside depth | 100mm |
| Container material | The parts in connect with materials is 304 stainless steel |
| Tempering jacket form | The bottom and the barrel jacket can input water for cooling, heat preservation and heating |
| Tempering jacket port | G3/8″，with quick opening movable joint，jacket withstand pressure≤0.4MPa |
| Tempering jacket circulation system | prepared by customer，jacket water inlet temperature≤8℃，cooling water flow＞3.5L/min |
| Discharge materialsform | / |
| Design environmenttemperature | -10～+120°C |
| Move mode | No casters, manual handling |
2) Mixing Parts
| Working frequency | 5-50hz |
| Mixing power | 0.55kw |
| Mixing blade speed | 14-130rpm |
| Mixing blade speed | 5-40rpm |
| Mixing blade diameter | 83mm |
| Mixing blade model | Variable cross-section spiral twist type, 90 ° helix |
| Mixing blade material | 304 |
| Mixing blade linespeed | / |
| Mixing blade number | 1pcs |
| Distance between blade and barrel wall | 3.5±1mm |
| Distance between blade and barrelbottom | 2±1mm |
3) Dispersing Parts
| Working frequency | 5-50hz |
| Dispersing power | 1.1kw |
| Dispersing rotatespeed | 580-58000rpm |
| Dispersing platediameter | 60mm |
| Dispersing model | Serrated |
| Dispersing plate material | 304 stainless steel |
| Dispersing line speed | 1.8-18m/s |
| Dispersing number | 1pcs |
| Dispersing shaftnumber | 1pcs |
4) Scratch the Wall Parts
Scratch wall bracket material：304 stainless steel
Scratch wall material：Teflon
Scratch wall rotate speed：Consistent with planetary box rotate speed
Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process)
5) Base and Lifting Parts
Parts materials：High rigidity structural carbon steel
Lifting way：electric
Lifting guide：High-precision linear guide
Lifting itinerary：≤212mm
6) Upper Barrel Parts
Upper barrel material：304 stainless steel
Powder feed port：quick opening interface DN50 1pcs
Mirror port：DN50 tempered glass sight glass 1pcs
Liquid feed port：ISO standard 1/2″ quick interface 1pcs
Vacuumize port：G1/2 ” 1pcs
Exhaust port：together with vacuumize port
Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs
7) Control System
Electrical cabinet：Used to install low-voltage electrical components such as inverter
Manual operation panel：For placement buttons, knobs, gauges etc
Power supply：AC 3×380V±5﹪，50Hz
Control mode：Electric control + liquid control
Power control and speed adjustment mode: Inverter start and control
Cooling mode：Air-cooled (Liquid cooling)
Operation mode：Touch screen or Key switch
Digital temperature display gauge：material temperature
Emergency stop button：1pcs
Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown
Speed display: Touch screen shows the speed
Power instructions: 1pcs
Timer: one, simultaneously control dispersion and mixing
Note: If you choose the HMI system configuration, the relevant content of the control system is integrated into the touch screen control
