Products Description
Product pictures are just as reference , please in kind prevail
1.Features：
Application
Various types of common battery powder and liquid mixing，eventually get a mixed uniform battery slurry. It is suitable for high viscosity process.
Suitable for operating viscosity range ≤ 1.2 million cP
Technical Parameters
| （1）Lower Barrel Parts | |
| Design total volume | 28L |
| Elective volume | 8-20L |
| Container inner diameter | 350mm |
| Container inside depth | 300mm |
| Container material | The parts in connect with materials is 304 stainless steel |
Tempering jacket form |
Single jacketed barrel wall for cooling or heating; single jacketed barrel bottom for cooling or heating |
| Tempering jacket port | G1/2″，with quick opening movable joint jacket withstand pressure≤0.4MPa |
Tempering jacket circulation system |
prepared by customer， jacket water inlet temperature≤8℃，cooling water flow＞10L/min |
| Discharge materialsform | bottom of a 1″ Three-piece discharge ball valve |
| Design environmenttemperature | -10～+120°C |
| Move mode | Casters move |
| （2）Mixing Parts | |
| Working frequency | 5-50hz |
| Mixing power | 2.2kw |
| Mixing blade speed | 8-86rpm |
| Planetary box rotatespeed | 5-53rpm |
| Mixing blade diameter | 194mm |
| Mixing blade model | Variable cross-section spiral twist type, 90 ° helix |
| Mixing blade material | 304 stainless steel |
| Mixing blade linespeed | 0.09-0.9m/s |
| Mixing blade number | 2pcs |
| Distance between blade and blade | 7±2.5mm |
| Distance between blade and barrel wall | 3+1.5mm |
| Distance between blade and barrelbottom | 3+1mm |
| （3）Dispersing Parts | |
| Working frequency | 5-50hz |
| Dispersing power | 3kw |
| Dispersing rotatespeed | 600-6000rpm |
| Dispersing platediameter | 70mm |
| Dispersing model | Serrated |
| Dispersing plate material | 304 stainless steel |
| Dispersing line speed | 2.1-21m/s |
| Dispersing number | 2pcs |
| Dispersing shaftnumber | 1pcs |
4）Scratch the Wall Parts
Scratch wall bracket material：304 stainless steel
Scratch wall material：Teflon
Scratch wall rotate speed：Consistent with planetary box rotate speed
Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process)
（5）Base and Lifting Parts
Parts materials：High rigidity structural carbon steel
Lifting way：electric
Lifting guide：High-precision linear guide
Lifting itinerary：≤450mm
（6）Upper Barrel Parts
Upper barrel material：304 stainless steel
Powder feed port： quick opening interface DN50 1pcs
Liquid feed port： Shared with powder feed port
Spotlight port: DN50 1pcs
Evacuation port: G1/2″ inner wire 1pcs
Exhaust port: G1/2″ inner wire 1pcs
Spare port: ISO quick opening 3/4″ 1pcs
Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs
(7)Control System
Electrical cabinet：Used to install low-voltage electrical components such as inverter
Manual operation panel：For placement buttons, knobs, gauges etc
Power supply：AC 3×380V±5﹪，50Hz
Control mode：Electric control + liquid control
Power control and speed adjustment mode: Inverter start and control
Cooling mode：Air-cooled (wind cooling)and liquid-cooled
Operation mode：The panel on the electric cabinet operates the corresponding button + knob
Digital temperature display gauge：material temperature
Emergency stop button：1pcs
Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown
Speed display: Touch screen shows the speed
Power instructions: 1pcs
Timer: 1pcs, control both dispersion and stirring
Note: If you choose the human-machine interface system configuration, the relevant content of the control system is integrated into the touch screen control
(8)Safety Chain System
Emergency stop: Press the emergency stop switch, the equipment will stop immediately and no operation can be performed
Start low speed stirring and mixing: you can turn the barrel while it is rising
High-speed dispersion: the barrel can be turned only when it is in place
Safety lock during operation: when the machine is running and mixing, the mixing barrel cannot be lowered and cannot be opened
Prevent vacuum pipeline backflow: special vacuum buffer tank design can effectively prevent vacuum pump oil from flowing back into the mixing drum
Operation fault stop: the inverter is protected by overload, overcurrent, overvoltage, leakage, lack of equal etc.
Mixing barrel lifting: the mixing barrel can rise only after it is in place
cannot be lowered until the vacuum is discharged from the mixing barrel (normal pressure is not restored)
High-speed dispersion can only be started after the mixing barrel is in place
The mixing drum is equipped with a locking protection system after it is raised to a high position to prevent the drum from falling abnormally during work;
The dry mixing stage requires the mixing paddle to rotate and raise the barrel at the same time.
