Products Description
1.The Basic composition
This equipment is mainly composed of computer, communication interface and battery formation cabinet. The battery formation cabinet is composed of a plate body including a clamp and a plate for the clamp, a constant current, a constant voltage source, a single-chip microcomputer and a control panel.
- The main performance
Number of equipment channels: a total of 512 channels in the whole machine.
Workflow control mode: whole machine control.
Charging mode: constant current, constant voltage.
Charging cut-off conditions: time.
Constant current and constant voltage source: Each battery has an independent constant current and constant voltage source, and its own circuit does not affect each other. PWM charging energy-saving mode is adopted to effectively reduce heat generation and power consumption.
Protection function: Each battery has a voltage upper limit protection function to ensure that each battery is charged to the required voltage.
Current and voltage settings: Charging current is centrally controlled and adjusted, which can be set by computer software or keyboard operation.
Process settings: The upper computer can set 20 step parameters, and the charging and other functions can be completed offline through keyboard operation.
Power-down protection: With power-down protection function, the original workflow can continue to run after the call.
Voltage screening: After charging, low-voltage cells can be screened.
Technical Parameters
| Main technical parameters | |
| Channels No. | 512 |
| Workflow control method | Body whole cabinet control Single point constant current, constant voltage mode |
| Charging model | Charging energy-saving mode: constant current, constant voltage charging |
| Charging cut-off conditions | Time |
| Current range | Charge 3mA-1A, resolution 1mA |
| Current accuracy | ±0.1%RD |
| Voltage accuracy | ±0.1%RD |
| Voltage measurement | 0~4999mV |
| Time set range | 0~999 minutes can be set arbitrarily, the time unit is min |
| Clamp type | Pouch cell clamp |
| The spacing between clamps | 65mm |
| Working power | AC220V±10%，50HZ，Power consumption≤4KW |
| Communication method | RS232，Baud rate4800 |
| Equiment shape reference size (mm) | 1440 (L)×400(W)×1840 (H) (For reference only, the actual equipment shall prevail) |
| Working environment | Temperature: 0-40℃, related temperature≤85%RH |
| Full load operating current | Phase line up to 30A |
| Equipment Weight | About 200kg |
