Products Description
Product pictures are just as reference , please in kind prevail
1.Features：
Application
Various types of common battery powder and liquid mixing，eventually get a mixed uniform battery slurry. It is suitable for high viscosity process.
Suitable for operating viscosity range ≤ 1.2 million cP
Technical Parameters
| （1）Lower Barrel Parts | |
| Design total volume | 88L |
| Elective volume | 29-60L |
| Container inner diameter | 500mm |
| Container inside depth | 450mm |
| Container material | The parts in connect with materials is 304 stainless steel |
Tempering jacket form | Single jacketed barrel wall for cooling or heating; single jacketed barrel bottom for cooling or heating |
| Tempering jacket port | G3/4″，with quick opening movable joint jacket withstand pressure≤0.4MPa |
Tempering jacket circulation system | prepared by customerjacket water inlet temperature≤8℃，cooling water flow＞30L/min |
| Discharge materialsform | bottom of 1pcsG1-1/2″ Three piece discharge ball valve with 2″ standard ISO quick connect clamp fitting |
| Design environmenttemperature | -10～+120°C |
| Move mode | Casters move |
| (2)Mixing Parts | |
| Working frequency | 5-50hz |
| Mixing power | 7.5kw |
| Mixing blade speed | 6-61rpm |
| Planetary box rotatespeed | 3-35rpm |
| Mixing blade diameter | 286mm |
| Mixing blade model | Variable cross-section spiral twist type, 90 ° helix |
| Mixing blade material | 304 stainless steel |
| Mixing blade linespeed | 0.1-1.0m/s |
| Mixing blade number | 2pcs |
| Distance between blade and blade | 4.6±2.5mm |
| Distance between blade and barrel wall | 3±1.5mm |
| Distance between blade and barrelbottom | 3+1mm |
| (3)Dispersing Parts | |
| Working frequency | 5-50hz |
| Dispersing power | 11kw |
| Dispersing rotatespeed | 315-3530rpm |
| Dispersing platediameter | 110mm |
| Dispersing model | Serrated |
| Dispersing plate material | 304 stainless steel |
| Dispersing line speed | 2 -20m/s |
| Dispersing number | 4pcs |
| Dispersing shaftnumber | 2pcs |
| (4)Scratch the Wall Parts | Scratch wall bracket material：304 stainless steelScratch wall material：TeflonScratch wall rotate speed：Consistent with planetary box rotate speedRemovable or not：Removable design (Need to remove when scraping the wall on high viscosity process) |
| (5)Base and Lifting Parts | Parts materials：High rigidity structural carbon steelLifting way：electricLifting guide：High-precision linear guideLifting itinerary：≤570mm |
| (6)Upper Barrel Parts | Upper barrel material：304 stainless steelVacuum feeder interface: Quick-open interface DN100 1pcsPowder feed port：quick opening interface DN50 1pcsLiquid feed port：ISO standard 1″ quick interface 1pcsSight glass port: DN80 tempered glass sight glass 2pcsVacuum port: G 3/4″ 1pcsExhaust port: G1/2″1pcsDigital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs |
| (7)Control System | Electrical cabinet：Used to install low-voltage electrical components such as inverterManual operation panel：For placement buttons, knobs, gauges etcPower supply：AC 3×380V±5﹪，50HzControl mode：Electric + liquid controlPower control and speed adjustment mode: Inverter start and controlCooling mode：Air-cooled (wind cooling) and liquid coolingOperation mode：Panel operation on the electrical cabinet with corresponding buttons + knobsDigital temperature display gauge：material temperatureEmergencyStop button：1pcsAlarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdownSpeed display: Touch screen shows the speed Power instructions: 1pcsTimer: 1pcs, to control both dispersion and mixingNote: If you choose the HMI system configuration, the control system is integrated into the touch screen control |
| (8)Safety Chain System | Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anythingStart low-speed mixing: can lift the barrel and rotate at the same timeHigh-speed dispersion: The barrel cannot be turned until it is in placeSafe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel.Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenonStop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protectionMixing barrel lift: stirring barrel in place to riseMixing barrel did not return to normal pressure can not be dropped.After mixing barrel rises in place and high-speed dispersion, then can be started.After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall.Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time. |
