Products Description
The XW-132MS-500-6M lithium battery coating machine is a versatile single-sided coating system designed for both continuous and intermittent operation. This advanced equipment is specifically engineered for the slurry drying process in lithium battery electrode coating applications. As a key component of pilot-scale lithium battery production lines, the machine offers dual coating modes to accommodate various manufacturing requirements. Its primary function is to facilitate precise and efficient electrode coating, making it an essential tool for lithium battery research and development as well as small-scale production.
Technical Parameters
| Model | Lithium ion Battery Coating Machine XW-132MS-500-6M |
| Source voltage | AC 220V/110V, 50HZ/60HZ |
| Power | 40000W |
| Warranty | One Year limited warranty with lifetime support |
| Suitable material thickness | Aluminum foil : 0.01-0.03mm |
| Copper foil : 0.006-0.020mm | |
| Max electrode width | 400mm |
| Mechanical tape speed | 1-6m/min |
| Coating speed | 0.6～8m/min, adjustable |
| Air compression | 0.5-0.7MPa |
| Coating mode | Single face continuous and intermittent coating |
| Equipment length | 8.5M (3M*2Section oven+2.5M) |
| Equipment function | 1 PLC intelligent control equipment, |
| has a continuous convex point easily eliminate clearance | |
| 2 Use hot air circulation heating mode, high thermal efficiency | |
| 3 Coating method : continuous and intermittent coating | |
| 3.1 The first face automatic fixed-length block coating | |
| 3.2 The second face automatic tracking the first face composite | |
| coating | |
| 3.3 Reverse coating interval length distance | |
| 4 Coating length : More than 50mm can set clearance or continuous | |
| coating | |
| The minimum coating length : 8mm, Minimum interval length : 5mm, | |
| The minimum track length : 50mm | |
| 5 Double-sided dry thickness accuracy : ≤±0.003mm | |
| 5.1 Both the front and coated alignment error : ≤±0.5mm | |
| 5.2 Each length error : ≤±0.5mm | |
| 5.3 Each paragraph width error : ≤±0.5mm | |
| 5.4 Trailing : ≤±0.5mm | |
| 6 Volume release tension can be adjusted continuously : 0～25N | |
| 7 Precision rectification controller : ±0.2mm(Re) | |
| 8 Core winding diameter : 3 inches, USES the gas rose axis, | |
| Max 300kg | |
| 9 Baking mode : | |
| 9.1 Hot wind drying, hot wind circulation, | |
| 9.2 Electric heating, | |
| 9.3 Hot air volume can be adjusted, air volume can be adjusted | |
| 10 Oven material : | |
| Both inside and outside is made of stainless steel, | |
| oven shell thickness is 1.5 mm | |
| 11 Oven temperature: RT- 150 ℃, | |
| each segment can be independently adjustable, | |
| temperature control precision＜±1℃. | |
| 12 Coating roll diameter : Φ120 mm | |
| 13 Max winding diameter : Φ500 mm,Max volume weight 300 kg |
