Products Description
8μm 12μm PE Battery Separator
Technical Parameters
Length:1000m, width:455mm, Thickness:8μm Mode:XW-PE-8
This polyethylene separator is a class A PE battery separator, the surface is smooth and clean without pollution, and the length is 1000m.
| Project | Unit | Technical indicators | |
| width | mm | 455 | |
| Material | Korean single layer wet PE | ||
| Thickness | um | 8.0±1.0 | |
| Coating thickness | um | 0 | |
| Air permeability | Sec/100ml | 120±50 | |
| Tensile strength | TD | Kg f/cm2 | ≥1000 |
| MD | Kg f /cm2 | ≥1000 | |
| Length | m | 1000 | |
| Porosity | % | 45±5 | |
| Puncture strength | G | ≥300 | |
| Heat shrinkage rate 130℃/1h | TD | % | ≤1.5% |
| MD | % | ≤2.5% | |
| Heat shrinkage rate 90℃/1h | TD | % | ≤1.0% |
| MD | % | ≤2.0% | |
XW-PE-12*50.5*1000
| Project | Unit | Technical indicators | |
| width | mm | 50.5±0.2 | |
| thickness | um | 12±1.5 | |
| Air permeability | Sec/100ml | 150±50 | |
| porosity | % | 40±5 | |
| Puncture strength | G | ≥450 | |
| Areal density | g/m2 | 7.0±1.0 | |
| 90℃±2/2h Heat shrinkage rate | TD | % | ≤1.5 |
| MD | % | ≤4.0 | |
| tensile strength | TD | Kg f/cm2 | ≥150 |
| MD | Kg f /cm2 | ≥100 | |
