Products Description
- Equipment name: Horizontal Hot Press Formation Machine.
- Equipment Type: XW-W32CH-5V6A.
- Equipment use: used for lithium pouch cell with tab in one side. The cell is clamped by heating aluminum plate and formed by fast heat conduction. Place the core to the pressure plate between clamping, clamping using cylinder mode. A single equipment 32 points, a set of fixtures, maximum charge and discharge current 6A.
- Equipment dimensions：about 16507001800mm(lengthwidthheight).
- Weight of equipment：about 500Kg.
- Equipment color:computer white or customer specified
Technical Parameters
| Features | |
| 1. Cylinder pressurization, controlled by PLC through electrical proportional valve, can achieve multi-stage pressure adjustment. | |
| 2. Adopt silica gel heating plate to heat, control temperature by PLC control temperature module. | |
| 3. The tab pressing block adopts insulating material injection molding parts. | |
| 4. Tab compression spring adopts die spring or 304 stainless steel spring. |
| 5. Protect function | |
| 5.1 Software over-voltage, under-voltage, over-current, under-current, over-capacity protection. | |
| 5.2 Voltage and current protection range can be set. | |
| 5.3 Set up a high alarm lamp to indicate the working state. | |
| 5.4 Equipped with emergency stop button, the fixture automatically opens when stopping. | |
| 5.5 Installation of smoke alarm, when smoke alarm machine stop running and alarm. | |
| 5.6 After the equipment alarm stops, you can continue the unfinished process from the interrupt position without starting the process from scratch. | |
| 5.7 If the communication between the lower computer and the upper computer is interrupted and the communication returns to normal, the work can continue according to the original process. | |
| 5.8 Over temperature protection, the system automatically cut off the heating and forming process and alarm when exceeding the set temperature. | |
| 5.9 When an abnormal power failure occurs, the current process step can be continued. | |
| 5.10 When the time communication is interrupted or the PC machine fails, the device will automatically enter the waiting state and continue the current process after the communication is reset quickly. |
| Installation environment requirements | |
| 1. Equipment dimensions: about1650*900*1750mm(length*width*height) | |
| 2. Package size: about 1850*1080*1930mm (length*width*height) | |
| 3. Compressed air: after drying, filtering and stabilizing pressure, the outlet pressure is greater than 5.0 – 7.0 kgf/cm² （0.5～0.7Mpa） | |
| 4. Source：AC220V/380V/50Hz/60Hz. |
