Products Description
Introduction
The battery cell in-Situ thickness gauge tester is a simple device that can test the real-time expansion thickness of the electric core under constant pressure during the long cycle of high and low temperature.
Applications
1. Servo motor controls pressure;
2. The pressure can be freely selected within the measuring range;
3. Rated voltage 200~240v/50~60Hz;
4. Can communicate with MES;
5. Has the function of testing the thickness of the battery cell.
Description
The battery cell in-situ thickness gauge tester is a simple device that can test the real-time expansion thick-ness ofthe electric core under constant pressure during the long cycle of high and low temperature.
1. Pressurization: motor control, the pressure can be freely selected within the range of mea-surement range;
2. Thickness calibration block: to check the thickness deviation of the measuring system;
3. Real-time testing, software control, and communication with MES.
4. Rated voltage 200~240v/50~60Hz.
Applications
Battery Cell In-Situ Thickness Gauge Tester
1. Constant Pressure Cycle Test
Battery Cell Ex-Situ Thickness Gauge Tester
1.GRR Test Data
Technical Parameters
Battery Cell In-Situ Thickness Gauge Tester
| Standard channel number | Pressurization method | Standard channel | Pressure control accuracy | Thickness detection range | Thickness detection resolution/accuracy | Temperature range | Maximum cell size |
| 1 | Motor pressurization | 100~2000g | ± 10g | 0~50mm | 0.1um/±10um | -20~60°C | 200*200*50mm |
Battery Cell Ex-Situ Thickness Gauge Tester
| Model | Size(mm) | Compatible cell Weight(kg) size(mm) | Resolution /accuracy | Pressure measurement range | Pressurecontrol accuracy | |
| PPG1050 | 450*530*1200 | 140 | 100*100*100 | ±10μm/1μm | 10~1000kg | ±0.3%F.S |
| PPG1100 | 650*600*1100 | 400 | 400*300*100 | ±20μm/1μm | 10~1000kg | ±0.3%F.S |
| PPG1100L | 1000*1200*650 | 800 | 600*400*100 | ±20μm/1μm | 10~1000kg | ±0.3%F.S |
