Products Description
Cathode electrode of intermittent coating batteries e.g. lithium cobalt oxide, lithium manganese oxide and LiFePO4, etc.
Technical Parameters
| Item | XW-DS500-ND80 |
| Roll size | Φ500×800 mm |
| Electrode width | Max 700 mm |
| Output rpm (frequency control of motor speed) |
2-20 r/min |
| Rolling accuracy | ≤±0.0015 mm |
| Line speed (frequency control of motor speed) |
3-31 m/min |
| Radial run-out of roll assembly | ≤±0.002 mm |
| Max. pressure between rolls | 50-300 T |
| Diameter of electrode coil | Max. φ900 mm |
| Main motor power | 30 KW |
| Weight of coil | Max. 1000kg |
| System work pressure | 25 MPa |
| Preheating temperature of S roll | Rom temp-120℃ (adjustable) |
| Tension adjusting range | 2~20 Kg (Infinitely variable control) |
| Roll gap adjusting accuracy | 0.001 mm (Display on touch screen) |
| Roll gap adjusting range | 0-50 mm |
| Dimension | Approx. 4000x1500x2500 mm |
| EPC accuracy | ±0.4 mm |
| Weight of roll press | Approx. 30 T |
Product Features
- Double motor drives the helical gear reducer (hard tooth face) through Schmidt joint coupling. The synchronism of two motors is controlled by encoder and frequency converter. The synchronous error ≤ 4/10000.
- Compressing: by air-liquid booster pump and underneath type of oil cylinder. Roll gap adjusting, automatically adjusted by servo motor driving middle slide wedge or manually adjusted by ratchet handle driving middle slide wedge.
- Top-and-bottom roll arrangement. Square-shape casting stands. Special bearing for high precision mills and bearing clearance eliminating device.
- Continuous press line consists of roll press, unwinder, rewinder, trimming, dust removing and vibration damper. The selfloading unit of rolls makes the roll changing easy and fast.
