Products Description
1 XW-DC300 semi-automatic electrode die cutter is mainly used for solid state dry battery electrode sheet cut for stacking process. It is a necessary tool in the production line of solid state battery to produce specific shapes of cathodes and anodes with current collector tabs.
2 This Semi Automatic Die Cutting machine adopts Safety Curtain built in the front of the machine and double start button ensures operation safety when electrode sheets are fed from the front.
3 High speed, high accuracy,long lifetime to make cutted electrode without burr, to get a good consistency.
Technical Parameters
| Model | XW-DC300 |
| Working Table Area | 300mm(L) x 250mm(W) OR 400mm(L) x 400mm(W) |
| Die Set Dimensions | 81mm (L) x 49mm (W) with current collect included |
| Working Voltage | 220V 50/Hz, single phase |
| Max. Power Consumption | 10W |
| Safety Sensor | Built in IR sensor (Safety Curtain) to protect against hand injuires during electrode feeding |
| Cutting Accuracy | ±0.1mm |
| Air Cylinder | 3 tons Max. pressure |
| Tensile Cylinder | 0.15 tons pressure |
| Feeding | Manually |
| Production Yield | 800 – 2000 pieces of electrodes per hour |
| Compliance | CE Certified |
| Warranty | One Year limited warranty with lifetime support |
| Air Pressure | recommend 60 psi (Air compressor is not included) |
| Product Dimensions | 550mm(L) x 450mm(W) x 900mm(H) |
| Net Weight | 120kg (265 lbs) |
| Apply | for pouch cell electrode sheet |
