Products Description
Battery Impact, Puncture and Extrusion Tester is a professional equipment for evaluating the safety performance of batteries. It mainly simulates the performance of batteries under extreme conditions, such as impact, puncture and extrusion, to test their stability and safety. This Battery Impact, Puncture and Extrusion Tester is widely used in battery R&D, production and quality inspection to ensure the safety of batteries in use.
Structure Composition:
Impact Module:
Simulates the external impact of the battery, usually equipped with adjustable impact force and speed.
Nail Puncture Module:
Pierce the battery through a sharp object to simulate an internal short circuit and detect the battery reaction.
Crush Module:
Simulates what happens when a battery is crushed or damaged and evaluates its compression performance.
Control System:
Adopts PLC or computer control to accurately adjust the impact force, puncture depth and other test parameters.
Safety Protection:
Equipped with explosion-proof box, exhaust system, etc. to ensure test safety.
Applications
Battery R&D:
Used for safety performance evaluation of new battery design, optimize battery structure and improve safety.
Production Quality Inspection:
Sampling inspection on the production line to ensure that the battery meets safety standards.
Certification testing:
For testing to pass international safety certifications such as UN38.3 and IEC62133.
Academic research:
Used for research on the safety performance of batteries in colleges and universities and scientific research institutions to promote technological progress.
Quality control:
To help companies establish a quality control system to ensure product consistency and reliability.
Technical Parameters
| Model | Battery Nailing Needling And Crushing Machine XW-BE-6048 |
| Testing space | W200*H200*D200mm |
| Testing box dimension | W1480*D720*H2040mm |
| Controller dimension | W500*D500*H1200m |
| Source voltage | AC 380V, 50HZ |
| Power | 2000W |
| Weight | About 450kg |
| Falling Ball weight | 9.1kg、10kg |
| Falling Ball height | 610~1000mm(Digital can be set) |
| Bar Diameter | 15.8mm or 7.9mm（can choose） |
| Power test model | Electric、Free fall |
| Pressure range | 1KN~15KN(Standard is 13KN) |
| Upper platen diameter | 150mm（no less than 20cm2） |
| Power error range | 1%Up and down |
| Needing speed | 10~150mm/s（stay speed can be control） |
| High temperature needle | Diameter |
| Delay function | 0~9999second |
