Products Description
This device is mainly applied to flexible packaging (medium and small size) lithium battery in the injection of liquid after standing vacuum, hot compression package; simple secondary packaging.
Technical Parameters
| Cavity made of aluminum alloy, corrosion-resistant, solid structure | |
| Vacuum up to-90Kpa ~ 0 adjustable (the buyer-owned vacuum pump) | |
| Head temperature: | RT ~ 250 ℃, temperature adjustable |
| Temperature control accuracy: | ± 1.5 ℃ |
| Heat sealing pressure: | 0 ~ 7Kg / cm2 adjustable |
| Sealing time: | 0 ~ 99 seconds adjustable |
| Edge width: | 5mm (according to customer requirements) |
| The maximum edge size: | 200mm |
| Head parallelism: | with triple carbonless paper, head pressure at 0.6MPa, the temperature at 200 ℃ when the seal out of the seal |
| Air consumption: | about 0.2L compressed gas / each time |
| Pneumatic working speed: | ≥ 180 times / h |
| Power: | 300w heat pipe, heating when the power consumption of about 0.6KW |
| Power supply: | 220V / 50Hz |
| Power: | 800W |
| Compressed air source: | 0.5 ~ 0.7Mpa |
| Dimension | |
| Working Department(L*W*H) | 510mm * 350mm * 500mm |
