Products Description
The application of conductive adhesive coating on copper (Cu) or aluminum (Al) mesh machinery.
1 Equipment standard composition and key configuration table
1） Put roll mechanism;
2） Coating tension mechanism;
3） Coating mechanism;
4） Drying system;
5） Winding tension mechanism;
6） Winding mechanism;
7） Automatic control system.
Technical Parameters
| 2 Machine Charactor： | ||||
| No | Item | Charactor | Remark | |
| 1 | Size | Width | 1.5m | Place Area : 2m(W)*10m(L)*5m(H) |
| Length | 8m | |||
| Height | 5m | |||
| 2 | Coating type | Continuous coating | ||
| 3 | Scraper adjustment mode | Servo motor control | ||
| 4 | Effective coating width | ≤300mm | ||
| 5 | Coating speed | 1-12m/min | Coating speed is related to the material system and coating thickness. | |
| 6 | Coating speed precision error | ≤0.1m/min | ||
| 7 | Coating speed | 15m/min | ||
| 8 | Overall length of coating machine | ≤12m | Front of machine:3.5 meters, | |
| End of machine: 3.5 meters. | ||||
| 9 | Overall height of coating machine | ≤5M | ||
| 10 | Oven length | 3m | Motor drive roller transmission | |
| 11 | Single section oven heating power | 13.5Kw | Electric heating | |
| 12 | Oven maximum temperature | 150℃ | Ambient temperature of 30 degrees, single section measurement | |
| 13 | Oven surface temperature | ≤50℃ | ||
| 14 | Temperature control precision | ±1℃ | Indicator value difference of temperature control meter | |
| 15 | Single oven section wind quantity | 2500m^3/h~3500^3/h | Up and downget in a draught, frequency conversion control, air volume can be adjusted | |
| 16 | Coating thickness error | ±1.5μm | ||
| 17 | Winding error of edge order | ±0.5 mm | Φ400mm/Roll | |
| 18 | Rectificationmethod (including the outlet of the oven Rectification) | Automatic deviation correction, precision ±0.5 mm | Ultrasonic testing / servo motor | |
| 19 | Unwinding mechanism | Speed control mode of variable frequency motor | Maximum load weight 200kg. | |
| 20 | Winding mechanism | Servo motor | ||
| 21 | Tension control system | Constant tension | Automatic tension compensation, | |
| Partial tension control of the Winding / unwinding | ||||
| 22 | Controller and man machine interface | 10.2 Inch color touch screen | Convenient operation and maintenance | |
| 23 | Equipment main body color | Light gray powder (except stainless steel) | Standard color PANTONE 1C (Have special requirements, please provide the color) | |
| 24 | Oven transition roller | Surface polishing / oxidation treatment | Stainless steel non grease rolling bearing | |
| 25 | Oven insulation material, oven material, thickness, sealing | Oven material is SUS304/ 202 stainless steel, thickness 1.5mm, NMP corrosion protect. With the continuous weld liner, leak proof NMP. | Insulation material for rock wool insulation oven, effective for temperature keep. | |
| 26 | Abnormal alarm function | Buzzer / touch screen prompt failure reason | ||
| 27 | Safety device | Mechanical interlock / safety warning signs / emergency stop switch button / protective cover, etc. | ||
| 28 | Counting function | Production quantity / length | ||
