Products Description
Instructions for use: Install the separator, pass it through the swing roller and place it on the stacking table. Set the number of stacks, take the negative electrode sheet and place it on the stacking stage to position the stack. Press the foot valve and the separator swing roller moves to cover the negative electrode sheet with the separator. Take the positive electrode sheet and place it on the stacking table. Position the stack and press the foot valve. The diaphragm swing roller moves to make the diaphragm cover the positive electrode sheet. Repeat until the set number of stacks is reached, cut the diaphragm, take out the battery core, and paste the termination tape to complete. .
Technical Parameters
- Maximum diaphragm roll: φ250mm;
- Applicable electrode specifications: length (0~200) mm, width (0~200) mm;
- Pendulum roller movement stroke: 400mm;
- Power supply: AC220V/50Hz;
- Air pressure source: 0.5MPa～0.7MPa;
- Equipment size: L650mm*W400mm*H700mm;
- Control box size: L200mm*W300mm*H380mm;
- Weight: 30Kg.
Product Features
- Desktop type, can be placed on an ordinary desktop;
- The adjustment, operation and maintenance of the machine are simple and easy;
- Applicable to a wide range of cell stack sizes;
- The electrode are placed manually, and the clamps assist in positioning to ensure the neatness of the laminations;
- High work efficiency, with digital display counter;
- Adopt foot switch to control cylinder action;
- The machine is small in size and exquisite in appearance.
