| Model | Electric Blast Drying Oven XW-DHG-9023A(1) |
| Source voltage | 110V/220V 50HZ |
| Power | 750W |
| Warranty | One Year limited warranty with lifetime support |
| Work box size | 300*300*270（mm） |
| Oven size | 500*450*440（mm） |
| Temperature range | RT+10～250℃, |
| Temperature resolution | ±0.1℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature controller | 30 segment programmable temperature controller. |
| Self tuning function. The timing time can up to 9999 minutes |
| Inner box material | High quality mirror stainless steel plate, round shape, smooth surface, easy to clean |
| Outside material | High quality cold-rolled steel plate, the surface electrostatic spray, hard and firm coat, |
| with strong anti rust ability |
| Sensor | A grade PT100 Platinum resistance |
| Heat pressure layer | High quality insulation system, inner box, inner shell,ultra-fine glass fiber, |
| Aluminum foil aluminum reflector, air – interlayer from inside to outside. |
| Observe window | The box door are provided with double-layer tempered glass observation window, |
| can observe the test result easily |
| Heating mode | Electric heating. Nickel chromium alloy electric heater |
| Safety installation | With over temperature protection, grounding etc. |
| Wind duct | Forced air circulation channel, ensure that the studio uniform temperature; |
| air duct provided with a heater, temperature sensor |
| Adjustable air intake | The control box and outlet air quantity, the casing is provided with an exhaust |
| can close or adjust discharge mouth to change wind effect. |
| Shelf | 2pcs |
| Timing range | 1-9999mins |
