Products Description
It is suitable for battery cell filling and standing, hot pressing pre-sealing process, adopts vacuum first, then filling and standing, with high electrolyte accuracy, absorption consistency and reliability. Then hot pressing pre-sealing.
Technical Parameters
- Cylinder and solenoid valve, vacuum components: Taiwan AirTac/Xingchen
- PLC: display control
- Touch screen: display control
- Analog vacuum meter: Panasonic
- Capacity range: 0.2ml~3L, adjusted according to the injection pump.
- Battery cell injection volume: 0.2g~3kg, adjusted according to the injection pump. Injection accuracy: ±1%
- Dispensing speed: 3ml/s adjustable
- Inlet and outlet pipes: φ6 pipe head temperature: room temperature ~ 250℃, adjustable temperature; Temperature control accuracy: ±2℃;
- Heat sealing pressure: 0~5Kg/cm2 adjustable;
- Heat sealing time: 0~99 seconds adjustable;
- Edge sealing width: 5±0.4mm (according to customer requirements);
- Maximum edge sealing size: 190mm;
- Sealing knife length: 200mm
- Seal thickness accuracy: The difference in package thickness between any two points is <15um. The cavity is made of aluminum alloy, which is corrosion-resistant and has a solid structure.
- Vacuum degree can reach -98KPa
- Power supply: 220V/50Hz;
- Power: 500W
- Compressed air source: 0.5～0.7Mpa
- Cavity volume: L330xW200xH150mm
- Dimensions: about L600W620H800mm
- Weight: about 95KG
Product Features
- One machine includes liquid injection, static, hot pressing and pre-packaging functions;
- It has extremely high metering accuracy and repeatability;
- Evacuate first and then inject liquid, with high efficiency, accurate precision, convenient and reliable operation
- The inlet and outlet are connected by chemical corrosion-resistant hoses;
- The head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and saves energy compared with similar products;
- The pressure of the head can be adjusted by the pressure regulating valve to achieve different process parameter requirements;
- The head is driven by a cylinder and guided by two linear guide sleeves, which is flexible and accurate in guiding to ensure the parallelism requirements of the product after edge sealing;
- The changes in the cavity can be observed during work through the perspective window.
- It can be operated in a glove box or a drying room;
- Exquisite appearance and stable performance;
- PLC, touch screen operation, flexible parameters, and high automation program;
