Products Description
Mainly suitable for battery, supercapacitor cell shaping, positive, The negative end face is compact and compact, which is convenient for laser welding with the upper and lower flow collector. The four-station shaping is adopted, so that the copper aluminum foil base material is gradually overwhelmed in the inward direction, and the forming effect is good.
Product Features:
- The use of four-station shaping, so that the copper aluminum foil substrate – a regular inward direction, no short circuit rate, so that the substrate overlap;
- Standard product short-circuit test function, screening defective products;
- Resistance test function can be installed on demand, the detection range can be set, and the resistance value of unqualified products can be detected and screened;
- When the product is changed, the length adjustment is detected and displayed by the grating ruler, and the adjustment is accurate, intuitive and convenient;
- PLC control, man-machine interface display, simple and convenient operation;
- Precision mold design ensures accurate cell shaping;
- Appearance geometric design, aluminum profile cover elegant and beautiful, easy to operate;
- A variety of automatic operation modes, can cope with various production conditions;
Technical Parameters
- Applicable products: 60 battery supercapacitor cell (diameter about 57mm), length 50 ~ 204mm, can be customized;
- Adjustable shaping speed and pressure holding time;
- Slider (indenter) maximum stroke: 20mm;
- Length positioning accuracy: ±0.03mm;
- Shaping length error: ±0.1mm;
- Service life: the normal service life of the tooling mold reaches more than 5 million times;
- PLC process control;
- Capacity: ≥3PPM;
- Operation rate: 98%;
- Power supply: 220V/50Hz;
- Air source: 0.5~0.7MPa;
- Air consumption: 0.5m³/min;
- Power: 0.5KW;
- Dimensions: L1100mm * W850mm * H1700mm;
- Weight: 450kg.
