Item No.: XW-80C
Application: This temperature environmental test chamber mainly used for electric and electronic products,components and other materials high low temperature test,temperature change,damp heat, etc.
Order(MOQ): 1 set;
Payment: T/T, Western Union, Paypal, L/C;
Product Origin: China;
Lead Time: 15days;
Note: XIAOWEI factory supports OEM.

Products Description

-40°C to +150°C High and Low Temperature Environmental Chamber

The temperature environment test chamber is mainly used for electrical and electronic products, components and other materials of high and low temperature test, temperature change, hot and humid. Environment simulation reliability test.

NOTICE: Use other than this may result in personal injury and mechanical damage.

Technical Parameters

Volume & Dimension
Effective Volume	80L
Inner Dimension	W400mmH500mmD400mm
Overall Dimension	W650mmH1650mmD1270mm
Overall Dimension	Kindly remark：exact overall dimension please refer to the final design drawing !

Performance
Condition	Environment temp.+5℃～+35℃,relative humidity≤85%.No load(without specimen in the testing zone)
Temp. Range	-40℃~+150℃
Temp. Fluctuation	≤±0.5℃
Temp. Deviation	≤±2.0℃
Temp. Uniformity	≤±2.0℃
Temp. Heating Time	About 1℃~3℃ /mins,average non-linear ,no load
Temp. Cooling Time	About 0.75~1℃/mins,average non-linear ,no load
Temp. Overshoot	≤±2℃
Max. Loading	No
Constant Max.Heating Load	No
Noise	≤70dB（A level）
Power	220V,50Hz,single phase
Standard Compliance	Standard Compliance :
	GB/T2423.1-2008(IEC60068-2-1:2007) Environmental testing – Part 2: Test methods – Tests A: Cold
	GB/T2423.2-2008(IEC60068-2-2:2007) Environmental testing for electric and electronic products Test methods – Tests B:Dry Heat
	GJB150.3-1986 High temperature test
	CJB150..4-1986 Low temperature test

Structure & Material
External Chamber	Adopt double electrostatic resin high temperature paint galvanized sheet.
Internal Chamber	SUS304# high &low temperature resistance stainless steel,
Insulation Material	Adopt fire-retardant high strength PU Polyurethane foam insulation material with thickness of 100mm, heat preservation coefficient less than 0.0212kcal/Mohr.
Chamber Door	Single open door
Observation Window	With vacuum glass observation window on the door ;and door frame with electric heat resistant, anti-frosting, anti-condensing devices, ensures clear observation of the specimen under testing.
Testing Hole	2 pieces of￠50mm testing hole on side of the chamber, with silicon seal and stainless steel cover.
Sealing	Adopt original imported silicon rubber strip, with high sealing performance.
Sample holder	Sample holder of Insulationmaterial,2 layers,capacity 20kg/layer.
Pressure Balance Port	Installed mechanical pressure close type balance adjustment device to avoid pressure difference influence the test chamber strength when do high temp. test.
Lighting inside chamber	With one energy saving light inside the observation window .
Wheels	The bottom of the box is equipped with 4 sets of universal wheels. There is self-locking function on the front two casters, which facilitate the movement and fixation of the equipment.
Smoke Vent	1 piece smoke vent.
	2 pieces of Explosion proof chain on the chamber’s side.
	1 set of tri-color light alarm.

No tags found for this equipment.