Products Description
Automatic battery electrode slitting machine, it is suitable for all cylindrical lithium-ion battery electrode preparation, especially for 4680 tabless battery.
The roll positive/negative electrodes after rolling are installed into a unwinding mechanism, and the electrodes are fed to the cutting set according to the process specification for cutting by dynamic traction, the upper and lower winding mechanism will collect the cutting electrodes in rolls, and two side edges materials are collected by the edge material mechanism.
The equipment is assisted by the correcting system, tension transmission system, vacuum system, etc. auxiliary precision running, to ensure the smooth running and the stability slitting of the electrodes, the burr, straightness and other process indicators are within the process range.
Technical Parameters
| High Speed Multi Station Slitting Machine | XW-HS1200 |
| Item | Technical parameter |
| slitting | Roller cutting/Laser cutting |
| Production rate | Max.150m/min |
| Cutting burr accuracy | Longitudinal ≤5μm, transverse ≤8μm |
| ADAPTS to substrate thickness | Positive electrode :8-20um Negative electrode :4-25μm |
| Adapt to incoming material thickness | 80-250 microns |
| Tool configuration selection | Conventional adjustable cutting/conventional fixed cutting/digital display cutting/automatic digital display memory cutting/laser cutting |
| Additional configuration selection | CCD detection closed loop/marking (labeling machine/inkjet/laser marking) |
| Dust removal iron configuration selection | Permanent magnet bar/Roller brush/ion wind cutting/Ultrasonic wave |
| Unwinding mode | Single axis/automatic turret double axis |
| Incoming material roll diameter | Max.1200mm |
| Drum specification | 3 “/6” /8 “/12” |
| Winding mode | Inflatable axis/slip axis |
| Winding bearing | Max.1250kg |
| Winding diameter | Max.1200mm |
| Reels received | Upper and lower two axes/parallel two axes/fixed four axes/double automatic turret four axes |
Equipment Features:
- Siemens bus control system;
- Cutting width controlled by CCD width detection and deviation correction closed-loop;
- Automatic cleaning slitting cutting;
- Matching with AGV automatic feeding, unmanned continuous production;
- MES system linkage , remote cloud control;
- Slitting cutting position digital display, automatic adjustment;
- One device completes pre-cutting and secondary cutting.
Quality monitoring and feedback:
- CCD online monitor and closed-loop control slitting width;
- CCD online monitor surface quality of product;
- Linkage identification of NG MARK, laser thickness measurement and CCD;
- Online burr detection.
