Products Description
It is used in the formation process of single-head out-tab pouch lithium-ion batteries. Clamping the cells by heating the aluminium plate and forming the cells by fast heat conduction. Clamping is done by pneumatic cylinders between the core and the platen. A single machine with 32 points, a set of fixtures with 8 layers, 4 cells in each layer. Maximum charge/discharge current 6A.
Technical Parameters
| Power supply cabinet parameters | ||
| Item | Indicator Parameter | |
| Resolution | AD：24bit；DA：16bit | |
| Input Impedances | ≥1GΩ | |
| Voltage | Constant voltage range control | 10mV~5V |
| Min. discharge voltage | Both ends of the upper and lower clamps can be discharged to 1V, and the length of 2m wire can be discharged to 1.5V. | |
| Accurate | ±0.01% of FS | |
| Stability | ±0.02% of FS | |
| Electric current | Output range | Range 1: 0.2mA-0.1A; Range 2: 0.1A-3A; Range 3: 3A-6A |
| Accurate | ±0.1% of FS | |
| Constant Voltage Cutoff Current | Range 1: 0.1mA; Range 2: 3mA; Range 3: 6mA | |
| Stability | ±0.05% of FS | |
| Power | Single channel output power | 30W |
| Stability | ±0.1% of FS | |
| Time | Current Response Time (10%FS~90%FS) | ＜1.5ms |
| Work step time range | ≤(365*24) hours/work step, time format support 00:00:00:00 (h, min, s, ms) | |
| Data recording | Data recording conditions | Minimum time interval: 100ms; |
| Minimum sampling voltage: 10mV | ||
| Minimum sampling current: 6mA | ||
| Minimum voltage interval: 10mV | ||
| Minimum current interval: range 1: 0.1mA; range 2: 3mA; range 3: 6mA | ||
| Recording frequency | 10Hz | |
