Products Description
The slot die extrusion coating method is employed (alternative coating techniques such as blade coating, four-side coating systems, and wire rod coating can also be utilized). This approach is primarily applied for surface coating of sheet-type materials, including lithium battery substrate coatings, solar photovoltaic films, polymer conductive films, OLEDs, and related fields.
Technical Parameters
| Main feature: | |
| * Adopt extrusion coating process, high coating accuracy and good consistency. | |
| * Injection pump feeding, feeding system closed, no external interference, paint demand and waste less; | |
| * Coated substrate is vacuum suction plate, built-in vacuum pump; | |
| * Easy to disassemble and clean the coating mold and feeding system; | |
| * Adopt large area uniform heating to ensure high precision uniform temperature inside the cavity; | |
| * Flat coating, motor driven scraper coating, coating speed is stable and adjustable; | |
| * Can be used in the glove box, easy to operate, small size, save space; | |
| * PLC. Touch screen control, equipment parameters adjustment, storage, control convenient and fast. |
| Model | XW-JYCM-250 |
| Voltage | AC110V-220V, 50/60Hz, Single Phase |
| Coating method | Slot die flat plate film coating, standard equipped with XW-JY100 Slot die film applicator |
| Coating stroke | About 250mm Stroke with step-less set and adjusted in the touch screen |
| Coating drive | Motor drive, coating speed with step-less set and adjusted in the touch screen |
| Coating speed | 0.5～20mm/s |
| Vacuum plate | Aluminum plate with vacuum |
| Vacuum plate dimension | L365mm×W200mm×H32mm |
| Film applicator thickness adjust range | 0～5mm adjustable |
| Injection volume | Stainless steel injection syringe: max 60ml |
| Feeding speed | 0.05-5mm/s (Piston speed of injection syringe) |
| Accuracy | ±3μm,optional 1μm digital dial meter |
| Heating drying system | Room temperature-130℃,digital display temperature controller, accuracy ±1℃ |
| Machine dimension | L560mm×W420mm×H370mm |
| Machine weight | About 65kg |
| Remark | Including built-in oil-less vacuum pump |
| How to use ? | |
| *Put the Al/Cu foil on the vacuum plate, power on, turn on the vacuum, Al/Cu foil adsorbed on the vacuum plate; | |
| *Place the film applicator on the Al/Cu foil; | |
| *Start coating, the push rod automatically pushes the film applicator to move and automatically coat the film; | |
| *Take out the film applicator and push rod, cover the heating cover, set the heating temperature and time, and conduct heating and drying; | |
| *After drying, open the heating cover, take out the electrode after coating, then reset the film applicator. |
