Products Description
XW-STX-1 is a compact stainless steel glove box equipped with an airlock chamber, gauges, and vacuum flanges. This design enables the glove box to operate under vacuum conditions, effectively removing moisture and oxygen without the need for costly inert gas purging. It serves as an excellent tool for material and chemical researchers, facilitating the processing of air-sensitive substances in a controlled environment.
Technical Parameters
| Glove Box Chamber | 1 Case Material: Made of 11 gauge (3mm thickness) 304 stainless steel sheet with sport frame, which provide heavy duty structure for vacuum |
| 2 Dimensions: 555mm(L) x 444mm(W) x 414mm(H) | |
| 3 Max. Positive Pressure: 810 Torr (1.1 atm) | |
| 4 Note: Gloves cannot work if pressure is higher than 810 Torr | |
| 5 Max. Vacuum Level: 0.5 Torr | |
| 6 Note: Stainless Steel case may deform at higher vacuum level | |
| 7 Leakage Rate in GloveBox: < 6 Torr/hour | |
| Air-lock Chamber | Dimensions: 200mm(ID) x 270mm(L) |
| Max. Vacuum Level: 0.05 Torr | |
| Vacuum gauge and valves | 1 Two vacuum flanges are included for glove box to achieve vacuum to remove moisture and oxygen without expensive inert gas purging |
| 2 Do not operate under vacuum status. Vacuum process is used for purging the glove box chamber before operation. | |
| 3 One KF-25 connector is installed in the back for connecting humidity monitor or other testing equipment | |
| Gloves | One pair of Latex Gloves are included for immediate use |
| Glove hole diameter : 139mm (2 pcs) | |
| Product Dimensions | 1186mm(L) x 480mm(W) x 490mm(H) |
