Products Description
The XW-ADCM-300 is an advanced automatic electrode die-cutting machine specifically designed for precision cutting of both cathode and anode electrode sheets in battery production and research applications. This sophisticated system integrates multiple automated components, including an automatic unwinding mechanism, a precision correction unit, an electrode positioning system, and a high-accuracy punching and cutting device. The machine is further equipped with a driving traction system for consistent material handling and an automatic waste collection mechanism for efficient operation. These integrated subsystems work in concert to provide a comprehensive solution for electrode sheet processing in modern battery manufacturing environments.
Main Component Composition：
*Discharging device: adopts the structure of air-rising shaft, air-rising shaft with positioning scale; adopts servo torque electrode automatic unwinding.
*Electrode limiting component: adopts guiding plate limiting guiding wheel to limit the electrode, to ensure that the electrode conveying does not deviate.
*Driving component: adopts stepping motor to control the traction automatically, and can set any electrode length for traction.
*Punching Component: The traction knife mould is punched up and down, and the knife mould pallet adopts modular mechanism, which is convenient for loading, unloading and adjusting.
*Conveyor Belt Adjustment Component: The conveyor belt is circulated through a number of over-plating rods to limit the over-plating of the conveyor belt.
*Protection device: Aluminium profile frame with Plexiglas plate protective cover is installed, and the die-cutting part is installed with protection of optical fibre.
Technical Parameters
| Equipment parameter index | Parameter |
| Maximum feed width | 300mm |
| Maximum processing area | Maximum punching size：320（including tab）*240mm |
| Thickness of the die size requirements | Thickness > 8mm |
| Feed control | Adjustable feed speed and step |
| Feed step precision | ±0.1mm |
| Safety device | Infrared grating protection and safety guards |
| Feed step accuracy | <0.1mm |
| Operation interface | Intelligent human-machine interface |
| Coil weight | <50kg |
| Coil outer diameter | <300mm |
| Punching Knife Life | 1-5 million times (according to the quality of the mould and the precision of machine adjustment) |
| Burr degree | Vertical burr ≤15μm, horizontal burr ≤20μm |
| Reel Diameter | 3 inches (inner diameter) |
| Scrap Recycling | Automatic waste separation and recycling device |
| Mode of operation | Automatic/manual mode |
| Control system | PLC |
| Total power | 3KW |
| Supply Voltage | Single phase AC220V |
| Machine weight | 700kg |
| Overall Dimension | l1650*w1000*h1800mm |
| Environmental Requirements | |
| Parameter Standard | Parameter |
| Ambient temperature | 0~40°C |
| Relative humidity | 20~90%RH |
| Power supply | Single Phase 220V, 50Hz |
| Voltage fluctuation range | ±10% |
| Compressed air | 0.4~0.8Mpa |
| Pressure fluctuation range | ±10% |
| No corrosive gases, liquids, explosive gases on site | |
