Products Description
Mainly applicable to supercapacitors cell, battery cell shaping, so The positive and negative end faces are formed and compacted to facilitate laser welding with the upper and lower collector plates.
Product Features:
- The use of multi-station shaping, so that the aluminum foil substrate – one after another regularly in the inward direction of the crushing, greatly reducing the short-circuit rate, so that the substrate overlap and the collector better contact welding firm;
- Pre-shaping first let aluminum foil substrate overlap light pressing, and then finally flat pressing to meet the shaping requirements;
- Precision mold design ensures accurate cell shaping;
- Appearance geometric design, aluminum profile cover elegant and beautiful, easy to operate.
Technical Parameters
- Applicable products: Applicable to Ø60 supercapacitors cell, battery products (can be customized) * 4 station mold shaping;
- Slider (indenter) maximum stroke: 30mm;
- Service life: the normal service life of the tooling mold reaches more than 2 million times.
- Operation rate: 98%;
- Power supply: 220V/50Hz;
- Air source: 0.5 ~ 0.8MPa;
- Power: 0.5KW;
- Dimensions: L850mm * W400mm * H600mm;
- Weight: 150kg;
