Products Description
1.XW-BTS-20V10A Laptop Battery Pack Tester 20V10A is an 8-channel battery analysis system suitable for lithium-ion, lithium iron phosphate, nickel hydrogen, nickel cadmium, and lead-acid battery packs. Each channel has a voltage of up to 20V and a current of up to 10A.
- This battery analyzer is designed according to international standards, with independent constant current and hardware constant voltage sources for each channel. Both constant current and constant voltage sources can be programmed and controlled by the user.
- battery pack testers adopt a plug and play module design, allowing users to freely remove and add module units without interfering with other units.
- Attention: You can choose a brand new laptop with accompanying operating software for immediate use.
Technical Parameters
| Model | Battery pack tester XW-BTS-20V10A | |
| Warranty | One Year limited warranty with lifetime support | |
| Source voltage | AC110V-220V±10% Customized, 50HZ | |
| Input impedance | ≥1MΩ | |
| Input power | 2346.7W | |
| Channel characteristics | Constant current source and voltage source adopt double closed loop | |
| independent structure | ||
| Channel control mode | Independent control | |
| Voltage range per channel | Charge : 40mV-20V Discharge : 2.5V-20V | |
| Accuracy : ±0.1% | ||
| Current range per channel | Charge : 20mA-10A Discharge : 20mA-10A | |
| Accuracy : ±0.1% | ||
| Output power per channel | 200W | |
| Time | Current response time | 0-10A : 20ms |
| Step time range | 1s-365*24h,Time format : 00:00:00(H:Min:S) | |
| Record condition | TimeΔt ：1-60000s VoltageΔU : 40mV-20V | |
| CurrentΔI : 20mA-10A | ||
| Charging mode | Constant current charge,constant voltage charge, | |
| constant current and voltage charge | ||
| Discharging mode | Constant current discharge,constant power discharge | |
| Conditions of constraint | Time, voltage, current, capacity | |
| Cycle | Cycle range | 1-65535 times |
| Steps pur cycle | 254 | |
| Protection | Power-down data protection,off-line test function and Safety condition setting protection | |
| Voice | ≤85dB | |
| Communication interface | Serial ports | |
| Channel number per unit | 8 | |
| Dimension(L*W*H) | 600*600*740mm | |
| Working temperature/humidity | -10-40℃ ≤70%RH | |
