Products Description
This equipment is mainly used to cut off the remaining edge of the aluminum-plastic packaging film after it is formed and second-sealed.
Using Process:
When manufacturing pouch cells, edge unevenness is expected. To create a battery with neat, smooth edges like commercial pouch batteries, follow these steps:
- Use an edge trimmer to trim off the excess area on the edge of the casing, leaving only a size suitable for folding and ironing;
- Use an iron to smooth the edges before folding;
- Use a folding machine to fold the edges;
- Use your iron to flatten the folded section again, then iron the longer section against the sides of the case.
Now a neat cell is complete.
Technical Parameters
- Trimming length: 190mm;
- Cylinder: ¢63*15;
- Aluminum plastic film trimming is equipped with an edge trimming template; trimming after the second sealing is equipped with an adjustable edge-retaining fixture;
- Precision guide post guide sleeve, trimmed without burrs;
- Power supply 220v, foot switch control.