Products Description
This equipment transmitted to the head (copper) through the resistance heating tube, and acts on the sealing material (aluminum laminated film) of lithium battery by using the heat conduction effect. Under a certain pressure, it is heated to become soft and close to the melting state to complete the compression fusion joint. The top seal and side seal can be realized without changing the mold.
Technical Parameters
- Voltage:AC 110/220V ±10% / 50/60 Hz;
- Power:500W;
- Compressed air: 5～8kg/cm²;
- Sealing Length:Standard size: Top sealing ≤200mm, Side sealing ≤200mm Can be customized;
- Sealing thickness:0.15-0.5mm;
- Sealing stamp width:5mm (Can be customized from 3mm to 10mm);
- Sealing pressure:0.5- 0.7 MPa (0 – 99 psi) adjustable;
- Sealing temperature:RT-250℃, adjustable with controlling accuracy +/-2 °C;
- Sealing time:0-99s adjustable;
- Dimension(L*W*H):L430x W330x H480mm;
- Weight: 35kg;
- Warranty: One year warranty with life time support.
Product Features
- Compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation;
-
It can prepare the pouch cell for the injection of an electrolyte by sealing the side and top of the pouch cell with the tab.
