Products Description
This is a manual cell feeding machine designed for lithium-ion prismatic cell manufacturing, suitable for battery lab lines, pilot lines, and production lines.
Basic Specifications of the Cell Feeding Machine
Technical Parameters
| No. | Item | Parameters | Remark |
| 1 | Speed | ≥3-5ppm | Determined according to labor proficiency |
| 2 | Overall dimensions of equipment | L:1200*W:900*H:1800 | |
| 3 | Compatible cell range | Thickness：20-60mmWidth：50-150mmHeight：100-200mm | Requirement: Within the compatibility range, the battery core compatibility can be achieved by adjusting the tooling. |
| 4 | Equipment failure rate | ≤2% | Failure rate=MTTR/(MTBF+MTTR) |
| 5 | Product qualification rate | ≥99.95% | Only refers to the product scrapping caused by equipment |
| Technical Requirements of Each Part | |||
| 1. Feeding mechanism | |||
| – Manual feeding mode, manual aluminum discharge shell and manual discharge core. | |||
| – A positioning mechanism is arranged at the place where the cell is placed. | |||
| – The aluminum shell shall not be damaged or scratched during operation. |
| 2. Shell Entry and Transplanting Mechanism | |||
| – The positioning cell roller is pressed by the soft rubber roller to position the cell; | |||
| – The aluminum shell positioning and transplanting mechanism adopts the module to move the positioning position, and the mobile data can be adjusted on the touch screen; | |||
| – Before entering the shell, there is a shell suction mechanism to expand the mouth of the aluminum shell to facilitate entering the shell | |||
| – If the cell is not in place, it can be pressed into the shell manually by pressing the shell handle |