Products Description
1.Configure sealing die：
Standard 18650 cylindrical battery sealing die (third sealing) (other cylindrical battery sealing dies are optional).
2.Main features：
1) The sealing edge is flat, with good air tightness, high dimensional accuracy, high efficiency and good consistency.
2) The built-in pressure gauge can observe and accurately control the sealing pressure.
3) It adopts hydraulic drive, and the battery seal is free of vibration and leakage.
4) Specially designed hydraulic structure saves labor in operation.
5) Precise mold design ensures accurate and reliable sealing and forming, solid steel structure design, stable and safe use.
6) Small size, easy to operate, and can be operated in glove box.
7) Beautiful appearance, easy maintenance, small size, convenient operation, accurate molding and other advantages.
Technical Parameters
| Sealing mold | Standard 18650 cylindrical battery sealing die (third sealing) (other cylindrical battery sealing dies are optional) |
| Operating force of hand rocker | Less than 6kg |
| Pressure gauge reading of normal cylinder battery encapsulation pressure | At about 80~100kg/cm2, the machine has been adjusted before leaving the factory. If higher pressure is required under special circumstances (the maximum pressure is 200kg/cm2, about 8 tons of pressure), it can be adjusted only after consulting the manufacturer. |
| Frame material | High-strength chrome steel, the surface will never rust after environmental protection electroplating and spraying treatment |
| Dimension | 235mm X 190mm X 350mm |
| Weight | 25kg |
| Mold material imported from Japan. | |
