| Technical Parameters： | |
| 4.1 Inner Chamber Size | W500 X H500 X D500mm |
| 4.2 Inner chamber | 1.5mm 304# stainless steel |
| Material |
| 4.3 External Chamber size | W700*D700*H1600mm |
| Remark:please refer the final design drawings. |
| 4.4 External Chamber Material | Cold rolled steel spray treatment(1.2mm thickness) |
| 4.5 Explosion-proof Glass | Double 200X200mm explosion proof glass, visible ( the size please refer the final design drawings) |
| 4.6 Chamber door | Connected to the chamber by powerful hinge, with explosion proof lock |
| 4.7 Bottom | One piece of marble slab to protect from battery external short circuit |
| 4.8 Lighting | Equipped with a high brightness energy-saving lamps to illuminate the entire test space |
| 4.9 Venting fan | A strong exhaust fan is installed in the back of the chamber |
| 4.10 Pressure relief door | built in the back of each chamber. In the event of a battery explosion, the door will open and release pressure. |
| 4.11 Testing port | one pieceφ50mm cable port with stainless steel cover on the left |
| 4.12 Control Panel | Control the venting fan and lighting |
| 4.13 Inside | 2 power line with two insulated handle thread clamp inside the chamber which is used to clamp the positive and negative pole of the battery |
| 4.14 Wheels | Installed with universal wheel at the bottom of the chamber |
| 4.15 Power source | AC 220V,50Hz,0.2KW; |
