Products Description
This battery separator coating machine is used for precision coating of lithium-ion battery separators. It mainly consists of an unwinding part, a machine head part, an oven part, a traction and winding part and an electronic control part. Apply the stirred slurry evenly on the substrate to ensure that the size and weight are within the process range. After drying, it is rolled up to make preliminary preparations for the subsequent processes.
Technical Parameters
| Item | Content |
| Model | XW-TBJ-P400 |
| Roller width | 400mm |
| Coating method | Continuous coating |
| Coating width (mm) | Max:300 |
| Single side coating thickness（µm） | 1～10 |
| Single side coating weight (g/㎡) | 10～25 |
| Coating speed (m/min) | 0.5～3 |
| Mechanical speed (no load) | Max:5m/min |
| Unwinding specifications | Roll diameter: Max.φ200mm. |
| Load bearing: Max.100kg. | |
| Reel specifications: Inner diameter 3 inches, approximately 76.2mm, length≤450mm. | |
| Reel material: metal, ABS plastic, paper tube. | |
| Winding specifications | Roll diameter: Max.φ200mm. |
| Load bearing: Max.100kg. | |
| Reel specifications: Inner diameter 3 inches, approximately 76.2mm, length≤450mm. | |
| Reel material: metal, ABS plastic, paper tube. | |
| Oven heating method | Electric heating |
| Oven structure | 2 sections × 1.2m/section = 2.4m, single layer |
| Oven temperature | Max：140℃ |
