Products Description
The XW-BDP100-S battery stacking machine is mainly used for Z-shaped stack assembly of positive and negative electrodes and separators in lithium battery cells. Manual loading, subsequent electrode position correction, and automatic stacking process are completed, resulting in high stacking efficiency and precision. Different sizes can be achieved by adjusting the fixture, which is very suitable for the development and sample production of stacked lithium-ion batteries. The desktop structure design of this device can be placed in a glove box for use; The equipment adopts a single cantilever structure design, with automatic constant tension control of the coil isolation film.
Main features:
- Automatic servo constant tension control for coil separator, Z-shaped automatic lamination.
- The number of laminations can be automatically controlled according to pre-set settings.
- Adopting compatibility design, battery size changes can be achieved by adjusting the positioning fixture, with a large adjustment range to ensure stacking accuracy.
- PLC control, HMI operation, easy to use and maintain.
- Manual loading of polarizers, automatic positioning, mechanical arm vacuum suction cup automatic suction, automatic stacking.
- The left and right movement is controlled by a pulse motor, which is precise and convenient for fine-tuning.
- Can be used in a glove box.
Technical Parameters
| Model | XW-BDP100-S |
| Stacking method | Z-shaped stacking, the separator is rolled |
| Operation mode | The mechanical arm automatically takes and stacks the material, and automatically pulls the diaphragm with constant tension control |
| Vacuum degree of suction | greater than -65Kpa |
| Stacking accuracy | Uniformity ≤ ± 0.3mm (relative position size between electrodes, 25 layers of stacking) |
| Electrode width | 40-90mm |
| Electrode length | 40-100mm (in the direction of the tab, excluding the size of the tab) |
| Tab length | Max.15mm |
| Stacking thickness | Max.15mm, the number of stacked layers Max.100 can be set |
| Separator roll diameter | Max 200mm |
| Separator core | 3-inch core, clamped with an expansion shaft; |
| Stacking speed | 4-6S/piece for stacked electrodes, 6-8S/piece for stacked metallic lithium (excluding the stacking preparation time for each cell) |
| Power supply | Single-phase AC220V ± 10% (customizable 110VAC), frequency 50Hz/60Hz, power 0.4KW |
| Gas source | 0.5~0.8MPa |
| Equipment size | L800 * W600 * H720mm |
| Weight | 120Kg |
