Products Description
1 Equipment function description and technique process
1.1This Semi-Automatic Lithium Battery Stacking machine is used for the stacking of pouch cell. The working process is as follows: the separator is unwinding actively, and the separator is deflected, the ferry and the tension mechanism are introduced into the platform; the platform moves the diaphragm back and forth to reciprocate to place the pole piece; the suction cup is accurately positioned and stacked on the platform;
1.2 Battery cell diagram
1.3 Equipment features
1) The platform adopts the sliding table structure, the cylinder moves, the positioning is accurate, and the stability is high;
2) The cathode and anode plates are designed separately to avoid mutual mixing of cathode and anode materials;
3) The separator is unwinding actively, the working tension is continuously adjustable, and the correcting device is provided;
4) The cathode and anode electrode carrying mechanisms are independently arranged and can be adjusted separately;
5) There are cathode and anode plate positioning devices, and the positioning plate is made according to the size of the electrode, and the adjustment is convenient;
6) The core is blanked by manual reclaiming;
7) The device interface is friendly, easy to operate and easy to maintain.
Technical Parameters
| Model | Semi-automatic stacking machine XW-L-DP200 |
| Dimensions | 1450mm (L) × 1100mm (W) × 1600mm (H) |
| Power supply | 220 VAC ± 5%, single phase, 0.5 KW |
| Gas source | 5~7 kgf/cm2, 200 l/min |
| Vacuum source | -0.09MPa, 100 l/min |
| Stacking accuracy | 1) Separator alignment error ± 0.3mm; 2) Electrode alignment error ± 0.3 mm. |
| Warranty | One Year limited warranty with lifetime support |
| Remark | Non-corrosive gases, liquids, explosive gases |
2 Material specifications and requirements for equipment
2.1 Specification of materials
| – | Materials | thickness | Width | Length(Include tab) | Exposed Length of tab |
| 1 | Cathode electrode | 0.09~0.2 | 40~160 | 40~250 | ≤30 |
| 2 | Anode electrode | 0.09~0.2 | 40~160 | 40~250 | ≤30 |
| – | Materials | Thickness | Width | Inside diameter | Outside diameter |
| 1 | Separator | 0.020~0.040 | 40~130 | φ76.2 | ≤φ300 |
2.2 Requirements of materials
1) The electrode coating must be uniform, the thickness error is less than 0.005mm, the length and width dimension error is less than ±0.20 mm, and the wave edge is less than 1mm (subject to the pole piece positioning);
2) The tab must be flat and try to avoid bending;
3) The burr at the edge of the electrode and the tab is less than 1/3 of the thickness of the separator;
4) The separator must be evenly wound, the width error is less than 0.1mm, and the tower shape error is less than 0.5mm.
3 Stacking Process
Battery cell specification
Unit:mm
| Specification | Dimension | Specific value |
| Length H | 40~250 | |
| Width W | 40~160 | |
| Thickness T | 5~30 | |
| Exposed tab length P | ≤30 |
Note: When the length H and width W change beyond the specification, it needs to be replaced.Corresponding specifications (standard configuration one specification).
