Products Description
The CS electrochemical workstation (potentiostat/galvanostat) includes a fast digital function generator, high-speed data acquisition circuit, potentiostat, and galvanostat. It has advanced hardware, complete software functions, high stability, and accuracy. It is a comprehensive research platform for corrosion, batteries, electrochemical analysis, sensors, life sciences, environmental chemistry, and more.
Applications
(1) Reaction mechanism of Electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc.
(2) Electrochemical analysis and sensor;
(3) New energy materials (Li-ion battery, solar cell, fuel cell, supercapacitors), advanced functional materials, photoelectronic materials;
(4)Corrosion study of metals in water, concrete and soil etc;
(5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection efficiency.
Technical Parameters
| Specifications | |
| Support 2-, 3- or 4-electrode system | |
| Potential control range: ±10V | Current control range: ±2A |
| Potential control accuracy: 0.1%×full range±1mV | Current control accuracy: 0.1%×full range |
| Potential resolution: 10μV (>100Hz),3μV (<10Hz) | Current sensitivity:1pA |
| Rise time: <1μS (<10mA), <10μS (<2A) | Reference electrode input impedance:1012Ω||20pF |
| Current range: 2nA~2A, 10 ranges | Compliance voltage: ±21V |
| Maximum current output: 2A | CV and LSV scan rate : 0.001mV~10,000V/s |
| CA and CC pulse width: 0.0001~65,000s | Current increment during scan: 1mA@1A/ms |
| Potential increment during scan: 0.076mV@1V/ms | SWV frequency: 0.001~100 kHz |
| DPV and NPV pulse width: 0.0001~1000s | AD data acquisition:16bit@1 MHz,20bit@1 kHz |
| DA Resolution:16bit, setup time:1μs | Minimum potential increment in CV: 0.075mV |
| IMP frequency: 10μHz~1MHz | Low-pass filters: Covering 8-decade |
| Potential and current range: Automatic | |
| PC and O/S requirement | |
| Interface: USB 2.0 | Operating System: |
| Windows 2000/NT/XP/ win7/win8/win10 | |
| Weight / Measurements | |
| Net weight: 6.5kg Gross weight: 10kg | |
| Instrument size: 36.5 x 30.5 x16cm; After package: 52.5 x 37.5x 22.5cm | |
| Electrochemical Impedance Spectroscopy(EIS) | |
| Signal generator | |
| Frequency range:10μHz~1MHz | AC amplitude:1mV~2500mV |
| DC Bias:-10~+10V | Output impedance:50Ω |
| Waveform: sine wave, triangular wave and square wave | Wave distortion:<1% |
| Scanning mode: logarithmic/linear, increase/decrease | |
| Signal analyzer | |
| Integral time:minimum:10ms or the longest time of a cycle | Maximum:106 cycles or 105s |
| Measurement delay:0~105s | |
| DC offset compensation | |
| Potential automatic compensation range:-10V~+10V | Current compensation range:-1A~+1A |
| Bandwidth: 8-decade frequency range, automatic and manual setting | |
