Products Description
used for solid state battery with tab in one side. The cell is clamped by heating aluminum plate and formed by fast heat conduction. Place the cells to the pressure plate between clamping, clamping using cylinder mode. A single equipment 32 points, a set of fixtures, maximum charge and discharge current 6A.
Features:
1. Cylinder pressurization, controlled by PLC through electrical proportional valve, can achieve multi-stage pressure adjustment.
2. Adopt silica gel heating plate to heat, control temperature by PLC control temperature module.
3. The tab pressing block adopts insulating material injection molding parts.
4. Tab compression spring adopts die spring or 304 stainless steel spring.
Technical Parameters
1. Equipment dimensions: about1650*900*1750mm(length*width*height)
2. Package size: about 1850*1080*1930mm (length*width*height)
3. Compressed air: after drying, filtering and stabilizing pressure, the outlet pressure is greater than 5.0 – 7.0 kgf/cm² （0.5～0.7Mpa）
4. Source：AC220V/380V/50Hz/60Hz.
