Products Description
It adopts a split design and is used for encapsulating the top and side edges of pouch cell lithium batteries.
Technical Parameters
- Split structure, easy to enter the glove box operation;
- Applicable specifications: side seal s190mm, top seal 190mm(with air bag);
- Sealing tool length: 200mm;
- Seal width: standard 5mm±0.3(2~10mm);
- Heat sealing temperature: room temperature ~ 250℃(adjustable temperature);
- Temperature control accuracy: ±2℃;
- Package time: Standard 25-35(0-99s adjustable);
- Sealing thickness accuracy: any two point package thickness difference <15um;
- Equipped with protective device to prevent high temperature scalding;
- Compressed gas: 5 ~ 8kg/cm2 (It is recommended to use the same gas as the glove box in the glove box);
- Power supply: AC220V/50Hz;
- Power: 0.5KW;
- Overall dimensions:
- Working part: L315*W150*H290mm;
- Control part: L320*W240*H220mm;
- Weight: 20Kg.
Product Features
- Unique safety protection, anti-burning design, the temperature of the upper and lower hot head can be adjusted by the thermostat panel button and the current value of the temperature;
- Split structure, easy to enter the glove box operation;
- The head is made of copper material, good heat transfer effect, save power consumption, improve work efficiency, energy saving than similar products;
- The pressure of the upper and lower head can be adjusted by the pressure regulator to achieve different technical parameters;
- The upper and lower head is driven by the cylinder through two linear guide sleeves, and the upper and lower movement is flexible, and the guide is accurate to ensure the parallelism of the product after the edge sealing Seek;
- Can be applied to different specifications of product batteries, and the adjustment is simple and convenient, no need to adjust and replace the head;
- Aluminum profile frame, beautiful appearance; Sheet metal adopts three-dimensional design, simple and beautiful;
- Small size, even sealing marks, beautiful edge appearance.
