Item No.: XW-SP020
Application: The XW-SP020 battery testing temperature control system is a commonly used testing equipment for coin cell, pouch cell, prismatic cell and cylindrical cell. It is necessary in the fields of battery research, production, terminal, etc. It simulates the charging and discharging test of the battery in the normal
Order(MOQ): 1 set;
Payment: T/T, Western Union, Paypal, L/C;
Product Origin: China;
Lead Time: 15days;
Note: XIAOWEI factory supports OEM.

Products Description

This equipment can be used in energy technology, electronics, electrical appliances, communications, meters, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products for quality testing.

Technical Parameters

Parameter
Model	XW-SP020	Temperature control range	10-80℃
Voltage	220V 50Hz	Temperature control resolution	0.1℃
Temperature fluctuation	±0.5℃	Temperature deviation	±1℃（After no-load stabilization）
Heating power	0.5KW	Temperature uniformity	≤±2℃（After no-load stabilization）
Heat up time	2.5℃/min(Average heating rate) 25℃~80℃ (no-load)	Cooling time	0.2℃/min (Average cooling rate) 25℃~0℃ (no-load)

Size and weight
Working size		W300mmD300mmH270mm
Box size		W420mmD540mH950mm
weight		50kg

Box
Box outer wall material		Cold rolled steel 1.2mm thick for the exterior
Box iner material		The interior is made of 1mm thick SUS304 mirror stainless steel
Thermal insulation material		Fiberglass insulation foam. The material is non-combustible and has strong heat insulation
Outer box coating material		By degreasing, rust removal, phosphating and other surface treatment after high temperature spray
outfall		Located at the lower back of the box, silicone drain pipe
caster		Universal casters are used. With brake function

Working chamber
Chamber quantity		1
floodlight		T5 or T8LED
Internal configuration		Standard 2 layers, equipped with a special mesh board, and sprayed with anti-conductive coating
Wire hole		The left side of the box is provided with a Φ50mm lead hole

Door
Quantity of the door		1
Observation window		No
Sealing material		Custom magnetic sealing ring
Handle		Alloy handle, easy to open and close doors

Ventilation heating system
Air supply mode		Horizontal diffusion vertical heat exchange arc cycle
Motor device		High temperature axial flow fan
Wind turbine material		Aluminum centrifugal impeller
Heating method		Electric heating
Heating device		SUS304 Stainless steel U-shaped heating tube
Heater control mode		SSR (Solid-state relay)

Refrigeration system
Compressor unit	Fully enclosed low noise rotor compressor, fluorine free refrigeration
evaporator	Finned tube heat exchanger
condenser	Air-cooled: finned tube heat exchanger
Throttling device	Expansion valve + capillary
refrigerant	R134a

Electrical control system
Temperature controller		Shanghai Pinzhi intelligent control. Intelligent liquid crystal temperature control instrument. PID control, heating and cooling automatic identification control, automatic constant temperature.
Control output		PID+SSR control, high temperature control accuracy
Timing		0-9999 minutes/hour. Instrument built-in
Temperature measuring device		PT100 Platinum thermistor
Protection system		Leakage protection, power failure protection, motor overload protection, overtemperature protection. Compressor overheat, overcurrent, overpressure protection, condensate fan overheat protection
Test method
Satisfaction test method		GB/T2423.1-2008(IEC60068-2- 1:2007) Low temperature test method Ab
		GB/T2423.2-2008(IEC60068-2-2:2007) High temperature test method Bb
		GJB150.4- 1986 Low temperature test
		GJB150.3- 1986 High temperature test

[equipment_tags]