Battery Process
More Custom Items
Pilot Line & Production Line-Electrode Preparation
Battery production equipment – front-end part (electrode preparation): Complete the process from material baking to electrode sheet completion. This part requires important equipment, such as coating machine, rolling press machine, vacuum mixing machine etc. The quality of these equipment can greatly affects the energy density and cycle times of the battery,
Xiaowei’s current fully automatic/semi-automatic battery production equipment and solutions can produce lithium batteries with a cycle number of up to 2,000 times. xiaowei has rich battery production experience and can develop perfect solutions according to needs.
Xiaowei New Energy Battery Materials
Battery production equipment – front-end part (electrode preparation): Complete the process from material baking to electrode sheet completion. This part requires important equipment, such as coating machine, rolling press machine, vacuum mixing machine etc. The quality of these equipment can greatly affects the energy density and cycle times of the battery,
Xiaowei’s current fully automatic/semi-automatic battery production equipment and solutions can produce lithium batteries with a cycle number of up to 2,000 times. xiaowei has rich battery production experience and can develop perfect solutions according to needs.
Satisfied with large-scale vacuum mixing of battery materials
The planetary mixer is a mixing equipment that integrates planetary mixing and strong dispersion, with high production efficiency. When working, the mixing device rotates and rotates, and can be mixed or dispersed at low speed alone, or mixed and dispersed at the same time
Fully automatic continuous battery coating machine for battery production
Battery coating machine is a single face continuous coating machine mainly used for Slurry drying process of lithium battery electrode coating. The battery coating machine adopts continuous coating mode, is mainly used for lithium battery (pilot) production line.
Fully automatic battery electrode roller press with rewinding and unwinding
Used in lithium battery/new energy battery production – battery rolling press machine, which coats or cuts the electrodes and then rolls them. Surface density can be increased by pressing the electrodes.
Used for NMP system processing in battery production situations
Lithium battery NMP recycling system: Mainly used for recycling NMP waste gas generated during the production process of lithium battery/sodium battery or NMP recycling in other industries.
Static and dynamic slurry handling systems in battery production situations
The battery slurry iron removal filtration device is a lithium ion slurry iron removal and filtration treatment equipment. It is used to optimize the slurry treatment after the cathode and anode electrode slurries of lithium ion batteries are batched and before coating.
Fully automatic high-speed cutting of battery electrode
In the battery production process, the lithium battery electrodes after continuous coating are rolled into rolls, which need to be cut into electrode sheets of specific sizes by a slitting machine, and then rolled and cut into small pieces for welding.
Continuous high-speed die-cutting of battery electrode
The die-cutting machine is mainly used for cutting battery electrode sheets. Usually in the lithium battery production-laminated process, the continuous electrode sheets are die-cut into specific sizes.
