Introduce
The pouch cell battery final sealing machine is mainly used for standing vacuum and hot-pressing packaging of pouch cell batteries after liquid injection, and secondary packaging after secondary liquid injection. The pouch cell batteries completed after final sealing are basically ready for testing and use.
About 3 devices for laboratory research on lithium battery pouch cell battery sealing.
- (top&side) pouch cell sealer machine;
- vacuum pre-sealer machine;
- battery final sealing machine for pouch cell.
More pouch cell lab research equiment video.
Pouch cell battery final sealing machine
Features
- The head is made of copper material, good heat transfer effect, save power consumption, improve work efficiency, energy saving than similar products;
- The pressure of the upper and lower head can be adjusted by the pressure regulator to achieve different technical parameters;
- The upper and lower head is driven by the cylinder through two linear guide sleeves, flexible up and down movement, accurate guidance;
- Ensure the requirements of parallelism after edge sealing;
- With automatic puncture function;
- The cover cavity is driven by the cylinder, guided by the linear guide sleeve, the up and down movement is lively, and the guidance is accurate to ensure the sealing requirements of the product;
- Can be applied to different specifications of product batteries, and the adjustment is simple and convenient;
- Easy to operate, beautiful appearance, small size, light weight;
- PLC control HMI operation, easy to use and maintain;
Main Parameters
- Head temperature: room temperature ~ 250℃, the temperature is adjustable;
- Temperature control accuracy: ±1.5℃;
- Heat seal pressure: 0 ~ 7Kg/cm2 adjustable;
- Heat sealing time: 0 ~ 99 seconds adjustable;
- Edge width: 5mm (according to customer requirements);
- Maximum edge sealing size: 200mm;
- Vacuum: Adjustable up to -95Kpa;
- Power supply: 220V/50Hz;
- Power: 900W;
- Compressed air source: 0.5~0.7Mpa;
- Dimensions: Working section: L500xW500xH700mm;
